Push Button Switch
Fits your CAM2742TQ2 Washer!
$304.74
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your CAM2742TQ2 Washer!
PartSelect Number
PS11753007
Manufacturer Part Number
WPW10330137
Manufactured by
Whirlpool
Product Description
Push Button Switch Specifications
This part is located in the control panel.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Whirlpool, Roper, Kenmore.
Part# WPW10330137 replaces these:
AP6019698, 3394075, 3394732, 697558, 8316433, 8316437, W10330137, WP8316433
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
December 17, 2018
The push button switch i have is half melted, is this part the replacement for this model, i can't perfectly match it cause melted part
For model number Whirlpool model CEM2750KQ3
Hi Donald,
Thank you for your question. The part number listed under your model number for the push button switch is PS11753007. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
January 5, 2024
Changed all sensors everything work but no heat was wondering if this part could make it not heat
For model number CEM2940TQ1
Hi Bob, thank you for getting in touch. This push button switch does not cause the dryer to not heat. We recommend checking the heating element. If it is fine, check the drive motor, part number PS334304. Dryer drive motors have a centrifugal switch that energizes a start winding when the motor is first started and closes a heat cycle contact to allow the heat source to work. If the motor's centrifugal switch is faulty, either the motor will not run or the motor will run, but the dryer will not heat. Since most centrifugal switches are not sold separately, the entire motor will need to be replaced if the switch is defective. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Judy
November 15, 2019
The start button is weak feeling it wont start the dryer, im not sure which part i need to get. Can you help? Judy
Hi Judy, this part PS11753007 would likely fix this symptom. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11753007
Manufacturer Part Number: WPW10330137
Manufacturer Part Number: WPW10330137
Brand
Model Number
Description