Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
January 8, 2018
I get a red flashing lid light when it's time to spin. I've changed the lid latch, clutch assembly, shift actuator and did the belt. It sometimes spins very slowly, but usually only in rinse. It won't spin in spin. I can find no codes anywhere on the machine, nor in the manual. I tried leaving it unplugged. Does it look like the electric control? I have bought so many parts with no results.
For model number MVWX600XW0
Hi Robert, Thank you for the question. You will want to put the appliance into diagnostic mode and check to see if there are any error codes. The issue could be a RPS sensor has failed .The error codes will help to point you in the right issue and part to replace. Hope this helps!
Was this helpful?
Thank you for voting!
Robert
January 9, 2018
What I tried to say in my last question was that I have found no list of error codes, neither in the machine nor in the owner's manual. I can't access the memory, if there is one. Also, I have not found a "rps" sensor in your parts list for my machine. I have already changed the shift actuator which looked like it had some kind of sensor on it.
For model number MVWX600XW0
Hi Robert, Thank you for contacting us. If you can put the appliance into Diagnostic Mode and get a error code we can look it up here to see what it means as well. The washing machine needs to be plugged in and in stand by mode with all indicators off.Choose any one button on the console except Power, Start, or Stop. Press and hold for 3 Seconds then release for 3 Seconds. Repeat this three times, Press and hold 3 Seconds, Release 3 Seconds - Press/Hold 3 Seconds. If the diagnostic test mode has been successfully, all of the indicator lights will light up for five seconds with 88 on the display. If it didn't work try again and count the three seconds, One one thousand…Two one thousand…Three one thousand. If there are any fault codes they will be displayed. If there are no fault codes all indicator lights will turn off for a moment then back on with 88 displayed and the automatic diagnostic test mode will begin in five seconds.Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752468
Manufacturer Part Number: WPW10305452