Product Description
Coupling Specifications
This part sits on top of the motor.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Blender.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WPW10279256 replaces these:
AP6018469, 9708914, W10279256
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
FRANK R - September 10, 2021
Verified Purchase
Blender coupling
Coupling fit my kichen aid blender and works great.
Heng C - March 19, 2021
Verified Purchase
Works great
It was the right part and work as exactly!
Albrecht S - January 31, 2019
Verified Purchase
Easy repair - part was correct
The part was brand new, the install was relatively easy, and it arrived quickly. The blender works now, and my wife is happy. Winning!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
teeth worn out from high speed ice crush
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.
Other Parts Used:
-
Robert from Lomira, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
139 of 261 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The driver (coupling) on my Kitchenaid Blender disintegrated.
I decided to see if I could dislodge the faulty coupling. I placed a screw driver under the coupling and pushed up. It dislodged. Subsequently I found a youtube video that indicated that was exactly what I should do.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
Other Parts Used:
-
Daniel from Geneseo, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old coupling was not removable to replace with new one.
Simply not possible ! I read reviews from other who have tried to remove the old coupling and not one seems to have succeeded. Unfortunately, you have to buy the coupling , 7$, and also the jar which has the incorporated blade, 87$ in order to complete the repair.
Seeing that the coupling can’t be replaced, you are stuck with an expensive jar that you can’t return for refund !
My recommendation, when the blender stops working, don’t waste your money buying these replacement parts, throw the old blender away. I ended buying a Ninja bender for 100$ that works a lot better than the old Kitchenaid.
Seeing that the coupling can’t be replaced, you are stuck with an expensive jar that you can’t return for refund !
My recommendation, when the blender stops working, don’t waste your money buying these replacement parts, throw the old blender away. I ended buying a Ninja bender for 100$ that works a lot better than the old Kitchenaid.
Other Parts Used:
-
Alain from WEST PALM BCH, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer went out would just run and run
Replaced the timer
Other Parts Used:
-
William from MOUNT MORRIS, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coupling got chewed up
to replace the coupling you take the bottom off the blender and loosen the screws that hold the bracket and fan -then comes the hard part-the shaft screw is bolted through every bit of the guts then into the coupling. It is a lefthand thread. I ended up having to fabricate a piece of metal that slipped into the top of the coupling (in the teeth.) Then I secured the metal piece-it was just a twi inch piece of steel- in the vise, I held the blender and I got a big guy to attack the shaft bolt with a bunch of pressure and a straight screwdriver. It finally popped and I was able to unscrew the old coupling and replace it with the new. Reminds of when guys put on lug nuts and I have to try and get them off. But I saved at least $100.
Other Parts Used:
-
shelley from Homer, AK
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra Brown
February 4, 2018
I need the replacement part made of plastic which fits over the brass piece under the pitcher which then fts in the coupler. By the way that plastic part is so flimsy is wore out after 3 months of use.
For model number KSB1575MC
Hi Sandra,
Thank you for your question. I believe the part you are referring to is the coupler. The part number for the coupler is PS11751771. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Alain
March 2, 2022
I ordered the plastic part number PS11751771. The old one won’t come out!
I saw reviews and no one seems to have figured out how to remove it !
How can I remove it in order to replace with new one. I also ordered the expensive jar part PS11756236. This jar is of no use if I can’t replace the bottom coupling.
For model number KSB560WHO
Hello Alain, thank you for your question. We did find a repair story that may help. " I ended up taking the bottom off of the unit and using a vise grip secured to the screw on the bottom of the motor fan and a pair of channel locks on the old coupler. The unit was laying on its side so that the vise grip was holding the fan in place against the counter top. I easily grabbed the coupler with the channel locks as it was slightly raised from the base surface. I cranked the coupler with a clockwise turn and it came right off. I installed the new coupler in seconds which automatically tightened upon running the unit with the jar. We hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
December 19, 2019
Cannot get the coupling out of blender. Know about cross threads. Wont budge. Now what?
For model number KSB560GCO
Good Day Richard. Thank you for your question in regards to your unit (Model Number KSB560GCO). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. Best Regards.
Was this helpful?
Thank you for voting!
Abigail
September 8, 2022
The blades on my blender don't go around, the plastic thing on the bottom of the blender that sits on the blender base has melted off. I can't seem to find a part for that??
For model number KSB1575OB
Hi Abigail,
Thank you for your question. From your description, it sounds like you are referring to the coupler.
The part number listed under your model number for the coupler is PS11751771. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Pat
October 4, 2022
Can I buy a part at the bottom of the jar in my kitchen aid blender ?
Its the part with grooves on it the fits in the blender coupling
For model number ksb560who
Hey Pat, thank you for your inquiry. We have researched your model and found that the part, Collar, does not come separately. You may need to replace the complete jar assembly, PS11756236. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751771
Manufacturer Part Number: WPW10279256
Manufacturer Part Number: WPW10279256
Brand
Model Number
Description