Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 9, 2019
Dishwasher completed a cycle without issue and when reloaded the next day the touch pad showed no lights and the unit would not start. Door seems to close properly. What is the most likely cause--door switch, thermal fuse, control panel? I do not have a continuity tester to check.
For model number WDF510PAYS6
Hello Robert, Thank you for the question. If there are no lights, this is more then likley the control board, PartSelect Number PS11722936. Hope this helps!
I replaced the main control board and the dishwasher still does not run and still no lights on the touch pad. What is the most likely reason after the control board? If the door switch is defective would it prevent the touch pad from operating? Thank you.
For model number WDF510PAYS6
Hi Robert,
Thank you for your question. If the dishwasher is still not working after replacing the main control board, verify that everything is fitted and connected correctly to the new board, if everything is connected correctly, then the door latch is just one part you will need to check. There are some other parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what other parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=WDF510PAYS6&mfgModelNum=&fkMfgID=3&ModelMasterID=368960&PID=40. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jayahn
December 23, 2021
The door on the dishwasher won’t lock and close. I already replaced the latch for it and that didn’t fix it.
For model number ADB1100AWW5
Hello Jayahn, Thank you for the question. We suggest checking the Handle and Actuator for wear or damage. Also make sure the door is level and able to close and catch the latch properly. We hope this helps!
Hi Ellis,
Thank you for your inquiry. We do have the switch available if you would like order it. If you would like to know if our parts are in stock, you will find the status of the part listed above the add to cart button. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
BEATRICE
October 1, 2019
The clean light keeps flashing and the dishwasher is not running
For model number abd1100aws5
Hello Beatrice, thank you for writing. If your dishwasher will not start, you will want to consider either the Heating Element, part number PS8260087, or the High Limit Thermostat, part number PS11743423 for your model as the cause. Good luck with your repair!
Was this helpful?
Thank you for voting!
Magi
March 6, 2024
Hi
My dishwasher intermittently stops working mid-cycle. I have to press resume button to restart.
what could possibly be the reason
For model number WDF310PAAW5
Hello Magi, thank you for reaching out. Based on the description that you have provided, we would recommend checking the door switch. If it is fine, then the issue is most probably with the electronic control board, part number PS11722935. You may need to replace it to fix the issue. Glad to be of help!
This is replacement door latch for your dishwasher. It is made of black plastic and is approximately 5 inches by 5 inches. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwas...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751645
Manufacturer Part Number: WPW10274880