Part Location Diagram of WPW10184148 Whirlpool Temperature Switch - 4 Positions
See part 37 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Temperature Switch - 4 Positions

★★★★★
★★★★★
1 Review
$119.05
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11749784
Manufacturer Part Number WPW10184148
Manufactured by Whirlpool
Product Description

Temperature Switch - 4 Positions Specifications

This part regulates the temperature of the water in the tub.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Amana, Inglis.
Part# WPW10184148 replaces these:
AP6016496, W10113058, W10184148
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 1 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Automatic water temperature switch failed
removed two screws and atc knob. swung control panel out. unplugged atc switch. pushed little tab down and turned the switch. it popped out and I put the new one in. plugged the cable back in. repositioned the control panel. replaced the atc knob and turned it to rinse. Voila!!! it works.
Other Parts Used:
  • stephen from Coventry, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
21 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

19 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
September 14, 2017
I am only able to get hot water to come on to do a wash. Will a new four way switch take care of the issue of not being able to use the cold, cool, and warm cycles?
For model number Whirlpool Roper Washer RTW4440VQ1
PartSelect logo
Hi Lawrence, Thank you for your inquiry. Where no hot water is coming into the washer you will need to check the water inlet valve, the temperature switch and the pump. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
RON
April 9, 2018
I am only getting cold water in my machine, i tried turning the temperature mixing valve, but no change. If i buy a new 4 position switch, do you think it will take care of my hot water issue, thank you..
For model number wtw5500sq2
PartSelect logo
Hello Ron, thank you for your question. The issue could be the temperature switch or the water valve itself. The hot water port on the water valve might be bad and stuck in the closed position, not letting any hot water into the unit. I would recommend testing the valve before ordering. If the valve is tested and is working properly the temperature switch should be replaced. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Richard
November 4, 2017
When on warm temp is tepid /cool. Hot setting works fine
For model number WTW5600VQ0
PartSelect logo
Hi Richard, Thank you for your inquiry. If the water is not the correct temperature, then you will need to check the temperature switch. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
September 16, 2019
I have a problem with getting water to go warm when selected. I went through all four selections and all selections seem to be working except when i select warm the water continues to be cold
For model number 11029622800
PartSelect logo
Hello Paul, thank you for contacting us. This is most likely due to a faulty Water Inlet Valve and Thermistor Assembly, part number PS11742194 for your model. You may also want to consider this Temperature Switch, part number PS11749784 as the cause. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ron
July 24, 2017
Some times the washer does not have cold water going into the tube on the rinse cycle some times when you shake the hose it start which sounds a little crazy. We changed both inlet hoses and cleaned the small screens at the entry points would it be the temperature 4position switch
For model number wtw5500sq2
PartSelect logo
Hi Ron, Thank you for the question. If you are able to shake the fill hose and have the cold water start you may have a loose connection to the water valve. I suggest maybe removing the back panel to expose the valve to see if all the wires are hooked up properly. If this doesn't fix the issue you may need to replace the water valve. The part number to the valve is PS11742194. Hope this helps !

1 person found this helpful.

Was this helpful?
Thank you for voting!
Luke
June 13, 2023
My washer produces severe water hammer in my hot water lines in my house when the washer needs hot water. I took a chance and installed a new fill valve assembly, hoping it was the hot water solenoid valve that was going bad. Did not fix the issue. Would it be safe to assume that it’s the temperature switch at this point? Thanks!
For model number WTW5590VQ1
PartSelect logo
Hello Luke, thank you for reaching out. According to our research, the temperature switch regulates the temperature of the water in the tub. The water hammer might be caused by trapped air in the pipes. We would suggest checking the hot water pressure in the pipe that supplies water to the washer. If pipes are not secured correctly, or perhaps have become unsecured completely, shock waves within the pipework are likely to be exacerbated by the physical banging of the pipe itself. Also, check the pipes for leaks or damage. The hammering sounds might be caused by two pipes hitting each other from the force of the water being shut off. Sometimes the straps holding the pipes to the framing come loose, allowing the pipes to bang together. We hope this information helps!

Was this helpful?
Thank you for voting!
Nathanial
January 16, 2019
My washer pulses during the fill on almost never temperature setting except cold. It pulses on cold sometimes too. Will this fix it?
For model number MTW5600TQ2
PartSelect logo
Hello Nathanial, Thank you for the question. This sounds like it might be a defective Water Inlet Valve, PartSelect Number: PS11742194. This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Bud
November 12, 2019
Only cold water coming into washer on all four setting
For model number 11028632701
PartSelect logo
Hello Bud, Thank you for the question. The most common issues would be a defective Temperature Switch. This part regulates the temperature of the water in the tub. Hope this helps!

Was this helpful?
Thank you for voting!
Terri
November 15, 2019
Have cold water, and warm, not hot. If I turn the cold off at the faucet when the washer is turned is on and only the hot is on with both valves open no water at all comes out. Hoses are not blocked, nor are lines.
For model number 110.29522800 Kenmore
PartSelect logo
Hi Terri, please check our guide https://www.partselect.com/Repair/Washer/No-Hot-Cold-Water/ . Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Bud
November 16, 2019
The washer only run cold water on all settings. I put in a new temperature switch it did not fix it.
For model number 110.28632701
PartSelect logo
Hello Bud and thanks for writing. Why is my washer not using hot water? If the washer fills properly in the rinse cycle, it will eliminate a bad cold water valve as your failure. In this case, you may have a bad temperature selector switch, failed timer or wiring problem. ... If the washer will not fill in the rinse cycle, you may have a bad water supply, failed valve or a wiring problem. We hope this helps. Please contact us anytime

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749784
Manufacturer Part Number: WPW10184148
Brand
Model Number
Description
Kenmore
11017812600
Washer
Kenmore
11018812700
Washer
Kenmore
11018812701
Washer
Kenmore
11020522900
Washer
Kenmore
11028522701
Washer
Kenmore
11028532701
Washer
Kenmore
11028622701
Washer
Kenmore
11028632701
Washer
Kenmore
11028692701
Washer
Kenmore
11029422800
Washer
Kenmore
11029422801
Washer
Kenmore
11029432800
Washer
Kenmore
11029432801
Washer
Kenmore
11029442800
Washer
Kenmore
11029442801
Washer
Kenmore
11029522800
Washer
Kenmore
11029522801
Washer
Kenmore
11029532800
Washer
Kenmore
11029532801
Washer
Kenmore
11029592800
Washer
Kenmore
11029592801
Washer
Kenmore
11029622800
Washer
Kenmore
11029622801
Washer
Kenmore
11029632800
Washer
Kenmore
11029632801
Washer
Kenmore
11029672800
Washer
Kenmore
11029672801
Washer
Kenmore
11029682800
Washer
Kenmore
11029682801
Washer
Kenmore
11029692800
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service