![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Electronic Control Board
Fits your KUDK03ITWH2!
$492.86
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your KUDK03ITWH2!
PartSelect Number
PS11748221
Manufacturer Part Number
WPW10084142
Manufactured by
Whirlpool
Product Description
Electronic Control Board Specifications
This part controls the functions of your dishwasher. It is located behind the control panel.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Electronic Control Board
![Replacing your Whirlpool Dishwasher Electronic Control Board Replacing your Whirlpool Dishwasher Electronic Control Board](https://img.youtube.com/vi/oZj0eMEU3kk/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Estate.
Part# WPW10084142 replaces these:
AP6014951, W10084142, W10084142R
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was taking way too long to go through its normal cycle; the indicator lite did not advance to DRY.
Remove just the 6 Phillips screws holding the control panel assembly to the top of the door. Panel lifted off, clearing the latch assembly. Rested it on my knees as I sat in front on a chair. Control board is right there. Wiring plugs easily pulled off the old board. Their locations are clearly marked on the board by wire colors. Removed screws holding old board, replaced with new one, plugged wires onto the new board. Screwed the control panel back on the door, being careful to clear the door latch assembly. Ran the dishwasher through a test cycle (time not included in the repair)and it works like new. Probably saved $150. in labor service charge.
Other Parts Used:
-
Robert from Burlington, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
87 of 101 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dry cycle did not work
Remove the top 6 screws and replace the control board
Other Parts Used:
-
Glen from FILER, ID
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
November 13, 2017
The control board skips some cycles, is there a part that needs to be replace other than the control board, like a fuse?
For model number du1055xtvd1
Hi Ron, Thank you for the question. The fuses and relays are built into the board, so the full board will need to be replaced.Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Serafin
February 28, 2018
Replace the control board with a new one washer stayed on wash cancelled the operation after 20 minutes. Later that day started washer stayed on wash for about 1 hr. Again i cancelled the cycle. Need advice
For model number DU1055XTSQ3
Hi Serafin, Thank you for the question. I suggest testing the Bi-Metal Fuse,PartSelect Number PS2360984. Use a multimeter to test the fuse for continuity and replace it if it is not showing continuity. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Al
March 2, 2018
Will not operate clean light on panel just blinks
For model number GU2455XTST3
Hello Al, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: door switch, heating element, bi-metal fuse, high limit thermostat, and electronic control board. You can test the parts with a multimeter. You should get a reading of between 5 and 30 ohms on the heater if it’s good and less than one ohm on the high limit thermostat and fuse. I have included a link to our article on how to test the door switch. Hope this helps!
https://www.partselect.com/Dishwasher+test-door-switch+repair.htm
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
January 22, 2018
The part has more ribbon connector pins (15) than the ribbon connector (14). Does the connection start on the board with the pin labeled "p1" or the pin next to it. When i unplugged the ribbon connector i didn't note if the p1 or the pin on the other end was left open. Neither of the videos mentioned the alignment of the ribbon pins. Intuition says it starts with p1, murphy says it doesn't. Please let me know.
For model number wpw10084142
Hi Bob,
Thank you for your question. You would start at P1. There are some appliances that this particular board goes to that has more pins, that is whey there is extra on the end. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
December 19, 2019
Control board has no power i do have power thru the fuse ? Control board bad?
For model number GU2455XTSS3
Hi Frank, thank you for your question. You may have to take a look at your door switches. If those parts are not working it will believe that your door is open and so no power will connect to the control board. You can test those switches with a multi meter. They should be testing 0 ohms. If you are not sure how to use a multi meter we have a tutorial here: https://www.youtube.com/watch?v=bWC44fHn0As. Good luck with your repair.
![](https://img.youtube.com/vi/bWC44fHn0As/maxresdefault.jpg)
1 person found this helpful.
Was this helpful?
Thank you for voting!
Francine Manseau
June 11, 2019
Je possède ce lave vaisselle depuis 10 ans. Il ne sèche plus mais fonctionne Encore pour le reste. Quelquefois la lumière clean clignote 7 fois et je dois le reprogrammer. L'élément a été vérifié et il est bon. On m'a dit (réparateur) que si ce n'était pas l'élément c'était le board. Je voudrais savoir ce que vous en pensez et si d'après vous cela vaut la peine de changer cette pièce quand même assez dispendieuse après 10 ans? Pouvez vous me confirmer que j'ai bien trouvé la bonne pièce ps11748221. Merci infiniment et j'apprécierais que vous me répondiez en français.
For model number KitchenAid KUDK03CTWH3
Bonjour Francine, merci d'avoir écrit. Ce tableau de commande électronique est le remplacement approprié pour votre modèle. Vous voudrez peut-être commencer par examiner la partie PS11743423 relative au thermostat de limite supérieure ou la partie élément chauffant PS11748194. Nous espérons que cela aide.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vickie
March 1, 2023
Stays on the wash cycle. Do I need the panel replaced? Do they still make one for this model?
For model number DU1055XTVQ1
Hi Vickie, thank you for your question. According to our research, you may need to check the control panel, part number PS11741388. If this is not causing the issue, we recommend you replace the control board, part number PS11748221. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Allen
March 9, 2024
Having a problem with Radom lights blinking for no reason, sometimes on their on. Occasionally you can it will work like a brand new one. What do you think could be causing this?
For model number Du1345xtvb1
Hi Allen, thank you for reaching out. Based on the description, the issue is with the control board, part number PS11748221. It manages the functions of the dishwasher, such as washing, draining and drying. We would recommend replacing the control board to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bobby
December 18, 2019
Will the control board i listed above work with the replacement board listed w10084142, w10084142 r
For model number w10084142 B
Hello Bobby and thanks for writing.
We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We do carry related parts for units just like yours. For example, part number PS11745496 Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Jesse
July 23, 2021
I replaced the control panel and still have no power to the control panel. What else could it be?
For model number 8647203433
Hi Jesse,
Thank you for your question. If you replaced control panel on the dishwasher and you still have no power to it, you may need to check the electronic control board and the door latch with switches. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748221
Manufacturer Part Number: WPW10084142
Manufacturer Part Number: WPW10084142
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)