Product Description
Rail Stop Clip Specifications
This part goes at the end of the rail to stop the dishrack from falling out.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Amana, KitchenAid.
Part# WPW10082861 replaces these:
AP6014921, 8270106, W10082861, WPW10082861VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
April 19, 2018
This part (#15 rail stop) is for one in the front not the one at the back, right ? Just want to make sure i order the right thing! Thanks
For model number 665.13269k111
Hi Barry, Thank you for the question. The PartSelect Number: PS11748191 is for the front of the rail. Hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Jeremy
July 23, 2019
Does this fit the left or right side rail end?
For model number WDT720PADM
Hello Jeremy, thank you for your question. This Rail Stop Clip for your model is used for both the left and right rails.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
February 5, 2019
Is this also the clip that goes on the back upper left rail (as you’re facing the dishwasher)? It looks the same, but a previous answer indicates it’s for the front. Thanks!
For model number 1399K802
Hello Susan, thank you for your question. The back rail stop is different. This part number is Part Number: PS11746591. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
February 19, 2018
How do I install the dish rack stop clip #1446951?
For model number wdf540padw1
Hi Patricia, Thank you for the question. This part goes at the end of the rail and just snaps in place. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Marjorie
August 21, 2019
I do not understand how to put the clip on the front of the upper rail. It keeps falling off. Do you have a better picture of how to put it on and how it looks when installed.
For model number WDT72OPADW1
Hello Marjorie, Thank you for the question. The clip should just snap in place. If it is not staying in place, check the end of the rail for damage and wear or the clip its self. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vernon
February 18, 2020
Part#wpw10082861
Is this item for just one stop, or for the pair of front of rack stops?
For model number WDTA50SAHZ0
Hello Vernon,
Thank you for your question. The rail stop clip is sold individually on our site. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
September 16, 2021
How do i put the front upper dishrack stop on the rail. I cannot seem to get it to fit. Is there a video or a good picture to show how it is to fit in place. I am now frustrated.
For model number WDF330PAHB2
Hello Bob, thank you for writing. Please see a video that should help with the installation. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marjean
July 13, 2021
How do I get my dinner plates to fit in the bottom rack properly? They will not stand upright in the rack they fall forward causing them to fall forward. The tine adjuster doesn't make a difference when moved. They are large bowl style plates. I just had the dishwasher installed and I am very disappointed and contemplating returning it.
For model number KDTM404EBL0
Hello Marjean, Thank you for contacting PartSelect.com. We think she is a question for KitchenAid. We just have parts lists and diagrams. For more specialized assistance or to speak with someone about this, we would suggest calling KitchenAid directly. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Part Videos
Replacing your Kenmore Dishwasher Rail Stop Clip
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken lower rack wheels, tine pivot, and rail stop clip
Easy, 5 minute repair. Snap off old, snap on new. I looked up on the manufacturer's website and got the replacement part numbers, then ordered on partselect for half the price.
Other Parts Used:
-
Greg from LEAGUE CITY, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
These 3 parts were broken or missing.
I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed!
Other Parts Used:
-
Sally from COCHRANVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I can not get the part to fit and stay in place.
It is a small plastic piece which serves as a stop on the right side of the upper rack. It is the correct part because it is identical to the left one of the same type. I tried clamping down with a pair of pliers but I am afraid of breaking it. With shipping this two inch piece of plastic cost $20, so I do not want to crack it. I am at a loss as to how to sit in in place.
Other Parts Used:
-
Marilyn from TRINIDAD, CO
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dish washer wasn’t cleaning dishes
The circulation pump is a super easy fix and the installation video parts select has on its website is accurate. I felt the most difficult part of the repair was removing the dishwasher from the kitchen counter to make the repairs. After you get the dishwasher out, you pretty much just pop the old pump out with your hands and a flat head screwdriver. (The supplied video is spot on ) Installing the new pump will require a pinch plier or a hose clamp. I chose a new hose clamp as it is cheaper and I would never use the pinch pliers after this job.
Other Parts Used:
-
Samoil from COOPER CITY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher circulation pump malfunction
Tipped over washer, removed attachment bolts, installed new pump by clamping water hoses. Be sure to use proper crimping pliers, not the generic slip joint pliers. Replacement pump included required new clamps.
Other Parts Used:
-
al from Fuquay Varina, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Michael T - September 18, 2021
Verified Purchase
Not obvious how to fit
You would think the clip is held in by the two tabs on the end, but you have to press hard on the centre tab to secure it.
Jeffery P - April 21, 2021
Verified Purchase
Simple install, arrived fast
Simple install. Arrived fast.
Donald S - November 11, 2019
Verified Purchase
Easy Repair
Parts are overpriced for what you get. The rail stops worked great and were reasonably priced. The rails were seriously overpriced at 100.00 for the 2 top rack rails
Sharon C - April 1, 2019
Verified Purchase
Was the exact part I needed
Glad to find your site, since Kenmore no longer opened it was great to find a place that carried parts. Dishwasher working perfect now. Am keeping you address in the event I need other parts for my dishwasher. thank you
Chris H - April 1, 2019
Verified Purchase
Dishwasher rack clip
Great condition- arrived fast and fit the appliance- very happy
- < Prev
- 1
- Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748191
Manufacturer Part Number: WPW10082861
Manufacturer Part Number: WPW10082861
Brand
Model Number
Description