Average Repair Rating: 4.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace touch panel
Easy. Removed the six(6) screws holdin the panel in place. Detached the controls parts from old panel and reattached to new panel. Once done, secured new control panel to dishwasher.
Other Parts Used:
Cedric from WYNDMOOR, PA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
December 24, 2019
I only need the decal for the control panel. The start button and cancel button cover have fallen off. It says it's a quiet partner 1, and it's black.
For model number Du1055xtss3
Hello Paul,
Thank you for your question. The decal for the control is only available through replacing the entire control panel for your model. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
April 11, 2023
Discovered a light blinking on the control panel. Disconnected the power for 5 minutes and reconnected. Pressed the Normal and the Hi-temp buttons twice within 3 seconds. All lights began flashing for a couple of seconds and stopped. Hoping this reset procedure had resolved the issue, the normal and Hi-temp buttons were pressed and the cycle appeared to work normally until just before the end of cycle. The unit stopped and the Cancel/Resume light was flashing. Pushing the resume button will resume the wash cycle and the dishes are satisfactorily. What would you recommend to repair this unit? It's 15 years old and has delivered great service until recently.
For model number DU1055XTSS2
Hi William, thank you for asking. Based on our research, a lot of the time, blinking lights have to do with the heating element. We would recommend testing your element with a multimeter to see if it is working correctly. If it is, then you may need to check the electronic control board, part number PS11748220, to fix the issue. Thank you for your inquiry, good luck with this repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748012
Manufacturer Part Number: WPW10021710