Maytag/Maytag_Thumb/1976.gif
See part 47 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Ceramic Fuse - 20 amp

$13.07   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747931
Manufacturer Part Number WPM0805101
Manufactured by Whirlpool
Product Description

Ceramic Fuse - 20 amp Specifications

This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t turn on
This part works with the following products:
Microwave, Microwave Oven Combo, Wall Oven, Range.
This part works with the following products:
Amana, Litton, Samsung, Maytag.
Part# WPM0805101 replaces these:
AP6014669, 14204182, 14204376, 14207948, 14208889, 14210231, 14212018, 14225047, 14QBP0239, 3601-001198, 4158060, 4158161, 4158378, 4158636, 4329243, 4339350, 4339351, 4358177, 4358263, 4358704 ... Show more , 4375073, 51001230, 51001303, 54001099, 57001067, 58001220, M0805101, R0713554, R9800424, WPM0805101VP, Y0044420, Y0054121, Y0057191, Y0087050, Y0312794 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Garrett
    June 13, 2019
    Where is the fuse located?The microwave lights up but no power
    For model number rrl-8x
    Hello Garrett, Thank you for the question. The fuse is located next to the Capacitor behind the control panel. Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Edward
    February 26, 2020
    I had engaged the cleaning cycle on the oven which is part of this combo unit and sits below the microwave. My wife decided to heat a up of water while the cleaning cycle was in progress. She claims the microwave started for a few seconds when the controls went blank and the microwave stopped working. The oven continued with the cleaning cycle which completed normally. No circuit breakers were tripped in the breaker box. I reset the circuit breaker for the appliance after the cleaning cycle had finished but the microwave continues to be unresponsive. The display on just the microwave is blank. The oven seems to work fine. Since the heat from the cleaning cycle vents through the microwave vents i am wondering if the fuse got too hot when the microwave was turned on a just blew. I am assuming the microwave and oven have separate fuses. If you believe it is a fuse how do i get to it to replace it. If not any suggestions.
    For model number JMC8130DDS
    Hello Edward, Thank you for the question. I would agree the fuse may have blown thinking the Microwave was over heating. We suggest replacing the fuse. Good luck with the repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Edward
    February 26, 2020
    How do i get to the fuse - my microwave is attached to the over and installed as one piece into the wall -jmc8130dds. Are there any diagrams available that shows where the fuse is and how to get it in a combo unit? I assume i am going to have to pull the whole unit out of the cabinet.
    For model number JMC8130DDS
    Hello and thank you for writing. Yes, you are right, you would have to take the unit out, then take off the cabinet. You will see the fuse close to where the power cord comes in from the back of the unit, there should be a small board onto which the fuse is clipped on. We hope this information helps. Please contact us anytime if you require further assistance.

    Was this helpful?
    Thank you for voting!
    Beth
    February 17, 2020
    After 1-2 minutes of operating unit powers off. Have pulled out from wall and push reset switch on back of unit. Will power back on, but will shut off again after approx. 1 minute. Any suggestions on what may be causing this and if it can be fixed?
    For model number JMC8130DDB
    Hello and thank you for writing. It certainly sounds like it could be a faulty capacitor PS11743000 and/or possibly faulty door switches PS373050 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 7 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Blows main fuse when the microwave generator start, (cooking function).
        Remove microwave from oven cabinet. remove cover and check main fuse with ohm meter.
        Tried fuse, it does not blow untill cooking starts.
        Check capacitor with ohm meter, after properly performing capacitor dischagre procedure.
        Order new capacitor, simple installation. another new fuse and all is good and cooking again.
        • Jay from Edwardsville, IL
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WPM0805101, D8547912
        39 of 48 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        microwave oven blew fuse
        First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
        .
        • tad from tamarack, MN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WPM0805101
        22 of 30 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        microve stopped working
        Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
        • Denice from Montgomery, AL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Parts Used:
          WPM0805101
        11 of 17 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Died while heating lasagna
        Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
        • connie from madison, NC
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WPM0805101
        9 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Microwave went pop and nothing would work.
        I mistakenly thought I had to remove the microwave to get to the back, not so. I would have had access to what I needed to unscrew; but I have to admit the hassle of taking it down and putting it back equals having to work on it attached to the shelf-your call on how you do this. I unscrewed the front top to remove the vent piece that is across the top front of the microwave. This will reveal the control panel screw. (While you have the vent removed you might want to clean the vent and the exposed filter.) carefully lift and pull out control panel. I unplugged a piece as the wires were tied tight. It will not completely detach, so carefully tip it back from exposed insides. The fuse is not clear but white with silver ends so look in upper right for it. I popped it out and replaced it. Replugged the wired part to cover and carefully fit tabs in and slide down to secre. Replace screw, replace vent piece and secure screws on top of microwave. I plugged it in to test before putting it back above my stove.
        • Deborah from STRUM, WI
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WPM0805101
        6 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Microwave not heating
        Replaced diode works great. your website said 92% diode was problem and it worked. Order fuse in case old was blown did not have to use it.
        • Tommy from FORT VALLEY, GA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WPR9800486, WPM0805101
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No power to any microwave functions
        Access is via RT. SIDE Panel as you face microwave. There are three screws on the bottom right edge to loosen. After that the side panel slips down and off. the fuse is located in the rear near where the power cord comes in. It is the white ceramic tube 1/4" in dia. and 1-1/2" long. Pull it out like any fuse and replace with new one. Reassemble and you are done!
        • Richard from CALIFORNIA, KY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WPM0805101
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11747931
          Manufacturer Part Number: WPM0805101
          Brand
          Model Number
          Description
          Litton
          1008000
          Microwave - Table Top
          Litton
          1009000
          Microwave - Litton Microwave Model 1009.000 (1009000, 1009 000) Parts
          Litton
          1010000
          Maytag
          1011000
          Litton
          1015000
          Microwave - Table Top
          Litton
          1018000
          Whirlpool
          10200
          Maytag
          102000
          Litton
          1020000
          Litton
          102001
          Microwave - Table Top
          Litton
          102002
          Litton
          1021000
          Microwave - Table Top
          Maytag
          1022000
          Litton
          1035000
          Litton
          1041000
          Litton
          1050000
          Litton
          1051000
          Litton
          120000
          Litton
          120001
          Whirlpool
          1285000
          Whirlpool
          1285A
          Whirlpool
          1290000
          Litton
          1304001
          Maytag
          1304002
          Litton
          1305000
          Litton
          1305001
          Whirlpool
          1305002
          Litton
          1305004
          Whirlpool
          1315000
          Litton
          1315001

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service