Roll Pin
$9.67
Special Order
PartSelect Number
PS11746935
Manufacturer Part Number
WP9705445
Manufactured by
Whirlpool
Product Description
Roll Pin Specifications
This roll pin is less than an inch long and is made of metal.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Jenn-Air, Crosley, Admiral.
Part# WP9705445 replaces these:
61003303, 9705445
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fountain broken
Fried the new circuit board, dead short somewhere.
Other Parts Used:
-
Kevin from Mukilteo, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clearing an ice jam resulted in a broken ice chute door
This is an easy repair and doesn't take hardly any time, once you can identify the electrical bridals to disconnect and the position of the new ice chute door interface point with the solenoid.
The supplied directions are complete but were quite a bit blurry. The more general dissasembly which is effectively 5 screws and two electrical bridals to remove/disconnect is straight forward. Pay particular attention to the mounting point of the ice door interface with the solenoid. I did it twice because I didn't align the door properly the first time:-)
Much too easy a job than to "call the guy."
The supplied directions are complete but were quite a bit blurry. The more general dissasembly which is effectively 5 screws and two electrical bridals to remove/disconnect is straight forward. Pay particular attention to the mounting point of the ice door interface with the solenoid. I did it twice because I didn't align the door properly the first time:-)
Much too easy a job than to "call the guy."
Other Parts Used:
-
Bruce from Clarkridge, AR
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the flapper for the ice dispensor was broken
i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .
Other Parts Used:
-
richard from dix hills, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door strike was broken on my dispensor
The repair did not work. The new door strike did not embrace the solenoid.
I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.
Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.
Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
Other Parts Used:
-
Pat from Spring, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker chute door broke off
Easy to install and it works fine. Recommend using the instruction manual and it was a breeze
Other Parts Used:
-
Merle from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746935
Manufacturer Part Number: WP9705445
Manufacturer Part Number: WP9705445
Brand
Model Number
Description