![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Rack Track Stop Specifications
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Rack Track Stop
![Replacing your Whirlpool Dishwasher Rack Track Stop Replacing your Whirlpool Dishwasher Rack Track Stop](https://img.youtube.com/vi/siE-8HethWg/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Not cleaning dishes properly | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WP8565925 replaces these:
AP6013365, 8270105, 8270106, 8524581, 8524582, 8562015, 8565920, 8565925, W10082860, W10082861, W10199682, W10508950, WP8565925VP, WPW10082861, WPW10082861VP, WPW10508950, WPW10508950VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Bronwyn K - 27 days ago
Verified Purchase
Exactly what I needed
Cheap and easy way to make the permanent fix I needed. The original part broke and I was able to easily find a replacement on this site and order it up. Came quickly and works exactly as i need.
Madeleine L - March 9, 2024
Verified Purchase
Parfait
Rapide, bonne pièce, je suis très heureuse
Edward D - February 20, 2024
Verified Purchase
Had a friend on mind install it.
Works great.
GORDON L - September 1, 2023
Verified Purchase
easy repair, I just made sure of the correct installation by watching a YouTube video.
The part fits okay,. My only concern is if this part is prone to falling off. Having said this, I now need to order one for the other rack.
Arn B - July 21, 2023
Verified Purchase
Quick and easy.
Fitted like a glove. Most impressed with Partselect!
Ida B - June 23, 2023
Verified Purchase
Dishwasher rack track stop
The part came quicker than I thought and was easy for my husband to put on.
Shawn C - February 19, 2023
Verified Purchase
Just what we needed!
Saved the day. Shipping was too high though.
Ronald W - January 23, 2023
Verified Purchase
Great price and good part.
The installation video was especially helpful. I do a lot of my own repairs and am pretty handy but would have had trouble figuring out the installation without the video. Please keep up the good work.
Beverly M - January 14, 2023
Verified Purchase
Top rack repair kit, worked perfectly. Happy to get it working again.
Perfect repair, everything worked great
Chris B - January 5, 2023
Verified Purchase
Pretty good
This part is a little expensive. One side fit well but other side doesn’t quite click in as easy and therefore keeps falling out. Parts Select is definitely the way to go for parts. Less expensive than factory and generally better made.
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 41 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper rack wheels had begun to break off. Shoddy design and materials.
I carefully followed the video instructions step by step. They were detailed, clear, and pointed out how to avoid installation mistakes. WIthout the video I would have been tempted to just figure it out myself - ("Hey, I'm a handy guy. How hard could it be, right?"). With the video I sailed right through with no dumb errors. The new rack adjuster wheel set is much sturdier than the Whirlpool original. It made sense to get new rack stops at the same time. Thank you, PartSelect.
Other Parts Used:
-
Steven from WASHINGTON, DC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
33 of 44 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broken off of top rack of dishwasher
The phone staff was so patient and helped me with the schematic and my model number to be sure that I had the right parts. I did the repair myself and saved so much money. Thanks.
Other Parts Used:
-
Stephanie from Concord, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
These 3 parts were broken or missing.
I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed!
Other Parts Used:
-
Sally from COCHRANVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost stop from one side of top rack. Rack could be pulled off track.
Looked at other side of top rack which still had the stop. Just had to orient the direction of the stop and push it firmly onto the rack arm. Took a couple tries, but it went in and locked. Works perfectly. Inexpensive and easy fix to to very annoying problem.
Other Parts Used:
-
Sheila from FAYETTEVILLE, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel missing left front of upper rack
Watched video at parts select to remove front, stops, then for wheel assembly after fumbling with wheel assembly to figure where to put pressure on wheel assembly release catch .......reverse assemble.....
Finish. Relax and ponder how parts are designed to fail then easily replace- saving maint and service charges. Had machine 5 years and replace a different failed part once a year so far . Seems a fairly good system as long as parts available.
Finish. Relax and ponder how parts are designed to fail then easily replace- saving maint and service charges. Had machine 5 years and replace a different failed part once a year so far . Seems a fairly good system as long as parts available.
Other Parts Used:
-
Michael from NEW PRT RCHY, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Three out of four wheel broke off of upper rack track after just two years
I order parts online from partselect, watched a YouTube video for five minutes that gave detailed instructions on how to install new upper rack assembly and in less than 20 minutes repair was complete. Piece of cake!
Other Parts Used:
-
John from MANCHESTER, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Rack wheel broke off /Front track stops replaced
The upper rack adjuster kit was replaced exactly as the video showed. I felt it was not very complicated and the new parts look more hefty then the original parts.
Front track stops was just a matter of snapping them into place.
Front track stops was just a matter of snapping them into place.
Other Parts Used:
-
William from WEST BABYLON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A wheel on the upper rack had fallen off. The wheel mount had worn.
Because the dishwasher is 15 years old I decided to replace all 4 wheel mounts. They were all worn and not clipping to the rack firmly.
The repair is obvious. No tools required. Remove the stops on the end of the rack slides (manually squeeze the top of the stop and pull up, or you could use needle nose pliers) and slide the rack out. Just remove the old wheel mounts and clip the new ones in place.
Slide the rack back in and snap in the stops.
The repair is obvious. No tools required. Remove the stops on the end of the rack slides (manually squeeze the top of the stop and pull up, or you could use needle nose pliers) and slide the rack out. Just remove the old wheel mounts and clip the new ones in place.
Slide the rack back in and snap in the stops.
Other Parts Used:
-
DAVID from CHAUMONT, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels on slider came off
replaced the whole bracket assembly very easy to do.
Other Parts Used:
-
MARIO from ALBUQUERQUE, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wheel on one side of the upper rack broke off
After I finally got the right parts and installed them I discovered that even though I had bought the OEM part for my dishwasher it not only didn't fit but prevented me from even getting the upper rack back in the dishwasher. The dishwasher won't work with out the upper rack properly in place. Every part store I looked at offered the same part for my dishwasher so obviously Whirlpool made a huge mistake. Since it's not possible to get the old parts back on (one of them was broken anyway which is what started all of this) I had to buy a new dishwasher. I did contact Whirlpool by email but got no response. If you own a Whirlpool dishwasher be very cautious buying any replacement parts.
Other Parts Used:
-
Richard from FONTANA, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jodie
October 7, 2019
Would these be the rack track stops for our model used for the front? When we pull the top rack out it comes completely off the track
For model number 66513263K112
Hello Jodie, thank you for inquiring. This Rack Track Stop part number PS11746591 is for the back on your model. The replacement for the front on your model is Rail Stop Clip part number PS11748191. Good luck with your repair!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
November 16, 2017
The clips that hold the upper rack continue to come off during the wash cycle and melt.We have replaced a couple times what can we do differently to ensure next ones we order will stay on.
For model number WDT910SAYM0
Hi Bill, Thank you for the question. The Rack Track Stop Clips should just snap into place. If they are falling out I suggest checking the ends of the tracks to see if they are bent and not holding the clips in place. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
January 9, 2020
I'm ordering a rack track stop for my dishwasher. Your description says available in white or gray, but in checking out i'm given no color option. The one that is still in place is gray and i'd like for the new part to match.
For model number WDT730PAHZ0
Hello Larry, Thank you for the question. The PartSelect Number PS11746591 is Grey in color. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mary Anne
February 11, 2020
The control lock (hold 3 sec) on my dishwasher control panel keeps blinking. It keeps me from activating any other control on the dishwasher panel. What can I do to remedy this problem? Your help is greatly appreciated.
For model number WDT750SAHZ0
Hello Mary Ann, Thank you for the question. You may need to reset the lock. Press the "Heated Dry" button, then quickly press the "Normal" button. Press the "Heated Dry" button again, and press the "Normal" button again to enter the diagnostic mode. Close the dishwasher door if it is open, and the diagnostic cycle will run. Check the dishwasher after 30 minutes to make sure the diagnostic cycle is complete, in which case the light should no longer be blinking. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Erin
February 19, 2018
Which part number do I need for the front top rack stop. It is hard to tell from the pictures.
For model number WDF320PADS1
Hello Erin, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11748191. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pam
April 15, 2018
Installing end clips on upper rack
For model number 66513482K900
Hi Pam, Thank you for the question. The Rack Track Stop Clips should just snap into place. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
October 16, 2019
How would a tray stop affect the dishwasher use? Can wp8565925 used to replace w10508950? I had to replace the chopper & instructions showed the first item (looked much easier to remove & replace), the 2nd one was very difficult to remove & in fact one of them broke! Poor design..
For model number MDB7749SBB3
Hello Carol, thank you for your question. This Rack Track Stop for your dishwasher stops the dish rack at the appropriate place when opening and closing the rack. Rack Track Stop, manufacturer's part number WP8565925, is for the back of the top track. Manufacturer's part number W10508950 has been replaced by WPW10508950 as the Front Track Stop on the top rack for your model dishwasher. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
JOHN
December 3, 2019
What is correct part for upper rack stopper for the above model. Is this model the same as wdt780saem1 ?
For model number WDT780SAEM
Hello John, thank you for inquiring. For your model dishwasher, the Front Track Stop is part number PS11755805, and the back Track Stop is part number PS11746591 for the upper rack. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randi
December 30, 2019
I need the rack stop for the upper rack of my Kenmore/Whirlpool dishwasher.
For model number 66513073K210
Hi Randi,
Thank you for your question. The part number listed under your model number for the rack track stop is PS11746591. We hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Shirley
August 2, 2018
How do you adjust top to extend all the way.It stops less than one half way
For model number 665.13832k601
Hello Shirley, thank you for your question. You might want to check the wheels on the brackets on either side of the rack to be sure there is no obstructions or the wheels are coming out of the track. You may have a bent track or wheel and bracket assembly. The rack should pull out almost the whole way. You can also adjust the rack by pressing the adjuster thumb button on either side of the rack. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746591
Manufacturer Part Number: WP8565925
Manufacturer Part Number: WP8565925
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)