This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Lower Spray Arm
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Estate, Inglis.
Part# WP8268874 replaces these:
3379363, 8051258, 8268874, 8268875, 9744234
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Les
March 28, 2019
I have this dishwasher. The lower spray unit is held on by nut assembly what part number would that be.
For model number 66515955793
Hello Les, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11747063. Thank you for your inquiry, good luck with this repair!
All i need is the top screw and plastic washer that holds it all together
For model number 3379362
Hello Jackie, thank you for writing. We would be happy to look into this, but we will need the model number for your dishwasher to do so. We look forward to hearing back from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Conrad
January 5, 2018
I replaced the nut holding this part on. The lower plastic bushing and the upper bushing were good. When I screwed the new nut in place the arm assembly was loose and wobbled is this normal. It did however wash the dishes after I replaced this nut.
For model number DU945PWPQ1
Hi Conrad, Thank you for the question. No the arm shoudl not have much of a wobble to it once installed. I suggest checking the Wash Arm Bearing Ring, Part Number: PS11747064 and the Lower Spray arm seal,Part Number: PS11741334 to make sure they are securely in place and didn't come loose when installing the arm and nut. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joyce
September 1, 2021
Jets in metal spray arms clogged, need to replace both upper and lower arms. What is cost for both upper and lower arms
For model number MDB4949SDM3
Hello Joyce, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11752935 for the Upper Spray Arm. PartSelect Number: PS11756698 for the Middle Spray Arm and PartSelect Number PS11722921 for the Lower Spray Arm. All prices are listed on the site. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
