Motor Control Unit WP8183196

Hi Dennis, Thank you for the question. The F01 indicates a failed electronic machine control board, PartSelect Number PS11752923. Hope this helps!

Hi Fernando, Thank you for your question. The F25 error code means that the tachometer on your motor is not working correctly. It could be that you just have a loose connection at your control board if replacing the motor did not fix the issue. I would suggest unplugging your appliance from power, then going to your control panel and unplugging and replugging all the wires one by one. Just so you make sure you put them all back in the right spot. If that does not fix the issue you might have to look into your board actually being the issue. I hope that helps. Good luck with your repair.

Hi Nader, thank you for your question. You may need to replace your motor however you might actually want to check your pulley and belt first to make sure those parts are not worn down. I hope that helps. Good luck with your repair.

Hello Quentin, Thank you for the question. The error code F21 means the machine has a “water draining issue”. This could be the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. If there is no clogs, you may need to replace the drain pump PartSelect Number: PS1485610. Hope this helps!

Hello Ken, thank you for your inquiry. According to our research, the error code F11 indicates a communication problem between the central control board and the motor control board. We would recommend checking the wiring between both the control boards for any damage. If the wiring is fine, then you may need to replace the motor control bard, part number PS11745069, to fix the issue. We hope this helps, good luck with this repair!

Hello Lori, thank you for contacting us. According to our research on your model, the issue is most probably related to a faulty control board, part number PS2581067. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Hello Pat, thank you for the question. According to our research, F28 means that your main central control board (CCU) and the motor control board (MCU) are not communicating with one another properly. We would recommend checking the motor control unit, part number PS11745069, to fix the issue. We hope this helps!

Hello Roderick, thank you for inquiring. You will want to replace the Electronic Control Assembly, part number PS2581067 for your model. Good luck with your repair!