This part is the replacement lid seal for your washer. It is made of rubber and is gray in color. It is approximately 21 inches long and 1 inch wide. The washer lid seal creates a seal for your top load washer and prevents leaks. If your washer is leaking from the lid, or if you are having difficulty closing the washer lid, the lid seal may need to be replaced. The lid seal will also need to be replaced if it is worn out or damaged. This part is sold individually and is sourced directly from the manufacturer. This is an authentic OEM part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WP8054939 replaces these:
AP6011657, 8054939
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Myra D - September 27, 2019
Verified Purchase
Great part - easy install
The part arrived quickly and was easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 19 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken seal
Removed old, pressed on new. This is no story but the reason I am writing is to say how impressed I was with the ease of using your Web site to find my part and of your spectacularly fast service.
Other Parts Used:
Samuel from Grass Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
15 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer lid seal replacement
Ordered the part, received part in short time and snapped it on in less than a minute. Seals better than original. Thanks PartSelect. I will be back.
Other Parts Used:
Kathleen from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lid seal cracked and came off causing vibration
Slid the replacement on the lid and it worked like a charm - no more vibration.
Other Parts Used:
David from Brookhaven, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old seal fell a part and caused bad virbrations
Slid off the old and slid on the new part. Actually my wife did it with no help and was rather pleased with her self on not needing any help except ordering it.
Other Parts Used:
Michael from Tinley Park, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part was cracked and falling apart
Too simple. The old one practicaly fell off and all I had to do was push the new one into place. It locked itself in and was ready to use.
No more rattling or noise when it runs now.
Other Parts Used:
Joyce from Dallas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rubber seal broke aprt
slid the old seal off the lid and the new one popped on so easily I do so many self- repairs at home now this was not even an issue.
Other Parts Used:
Lisa from North Attleboro, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked, broken seal
The old seal had become brittle, cracked and fragmented and would no longer fit in the slot. Without it, washing had become a real mess. I took the new seal and snapped it in within a few seconds and was back up and running again. I looked everywhere for this seal, but this site was the only place I could find it. Thanks for having such a wide range of parts. This inexpensive broken part had made my machine unusuable. If it were not for you, I probably would have to resorted to a Sears appliance technician who would have charged $60 for just showing up.
Other Parts Used:
Ronald from Glenwood, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The splashguard on the lid kept falling off and eventually split.
Old one fell off in my hands. I just snapped the new one in its place. Super easy. Repairman wanted $43 for the part plus the labor of $39. THe part cost me just $20 with shipping. Thanks!
Other Parts Used:
Debra from Mentor, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the rubber lid seal had torn and was falling off of the lid.
I removed the torn part which just pulled off of the lid and snapped in the new piece. No tools were needed. I also wanted to add that it was great doing business with Part Select. The part came well packaged, it came in a timely manner, and it was the correct part ! I will try Part Select for any of my future repair part needs. Thank you
Other Parts Used:
VICKIE from MEQUON, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wow!
I received the order quickly (although thought it could have been packaged in a much smaller box) and it took less than 10 mins to remove the old seal and replace with the new one. Only problem is the seal I ordered wasnt causing the problem ..lol so will be ordering again!!! Thank you!
Other Parts Used:
Sheila from Borger, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
August 26, 2017
This part wp8054939, the seal for the washer lid, does it require glue to install?
For model number LSQ8000LQ1
Hello Michael, thank you for contacting us. This seal does not require glue, it just snaps into place. Good luck with the repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
RICHARD
January 29, 2018
2 questions... 1) lid needs slamming to start wash cycle. what part do i need to repair?
2) lid seal is broken. which part no. is for this model and can i just buy the rubber without the metal frame it slides on to?
For model number Maytag MTW5740TQ0
Hi Richard,
Thank you for your question. if the washer is not starting and you have to slam the lid to get it to start, the issue is with the lid switch and it will need to be replaced. The part number for the lid switch is PS11745957. The part number listed under your model for the lid seal is PS11744855. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 23, 2021
Is cost really for the strip of plastic on the washer lid. Or the entire lid with seal?
For model number MTW5600TQ1
Hello Michael, Thank you for the question. This is just the Lid Seal as seen in the picture. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
September 1, 2022
Do I order this 'LID-SEAL' through WHIRLPOOL, (Part # WP8054939) or through MAYTAG, (Part # PS11744855)? Will the price for the part be the same from either Manufacture? Thank You
For model number MTW5740TQ0
Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Manufacturer Part Number WP8054939. The PartSelect Number PS11744855 is the same part. PS stands for PartSelect our company name and is our part number for the same part. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
