( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Broil Element

 Fits your 66595775890!
$146.93
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 66595775890!
PartSelect Number PS11744841
Manufacturer Part Number WP8053874
Manufactured by Whirlpool
Product Description

Broil Element Specifications

This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling
This part works with the following products:
Range.
This part works with the following products:
Kenmore.
Part# WP8053874 replaces these:
8053874
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deann
January 20, 2018
My current broil element is not heating up properly. It will heat but only slowly and only to a low temp. I believe this is the cause of my heating issues and i currently have to set my oven 15 degrees higher than needed. Does this come with instructions on how to replace? Do we just unscrew from the back of the oven wall? Thank you.
For model number 66595822003
PartSelect logo
Hello DeAnn, Thank you for your inquiry. Pull out the oven racks, and remove the screws that hold the element to the inside top of the oven. Remove the two screws on the back wall, once you have the screws undone, you can pull the element out. Since the wires are short, it is recommended you place a twist tie or wire to keep them from falling back inside the oven, then disconnect them from the element. If they do fall back inside the oven, you will have to remove the back panel to push them back through the holes. Grab the end of the wire with a pair of needle nose pliers and pull it forward and reconnect it to each side of the element and remove the ties. Once you have it connected, you have to guide the wires back through the holes in the back of the oven. Reconnect the brackets on the rear wall and top of the oven. Although we do not have a repair video for this exact part number, I have included a link to a similar part to assist you. Hope this helps! https://www.youtube.com/watch?v=nVoA7fB0Wso&t=8s&list=PLDDA8228D5AC1E937&index=77

4 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744841
Manufacturer Part Number: WP8053874
Brand
Model Number
Description
Kenmore
66565025101
Range
Kenmore
66592002100
Range
Kenmore
66592002101
Range
Kenmore
66592002102
Range
Kenmore
66592004100
Range
Kenmore
66592004101
Range
Kenmore
66592004102
Range
Kenmore
66592005101
Range
Kenmore
66592005102
Range
Kenmore
66592012100
Range
Kenmore
66592012101
Range
Kenmore
66592012102
Range
Kenmore
66592014100
Range
Kenmore
66592014101
Range
Kenmore
66592014102
Range
Kenmore
66592015101
Range
Kenmore
66592015102
Range
Kenmore
66592022100
Range
Kenmore
66592022101
Range
Kenmore
66592023101
Range
Kenmore
66592024100
Range
Kenmore
66592024101
Range
Kenmore
66592025100
Range
Kenmore
66592025101
Range
Kenmore
66592029100
Range
Kenmore
66592029101
Range
Kenmore
66592142300
Range
Kenmore
66592143300
Range
Kenmore
66592144300
Range
Kenmore
66592152300
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service