Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling | Element will not heat
This part works with the following products:
Wall Oven.
This part works with the following products:
Amana, Maytag.
Part# WP77001099 replaces these:
0315451, 77001099, Y0315451
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
STEVE K - April 30, 2021
Verified Purchase
very easy to install and works great
I was disappointed the way the part was prepared for shipping, I am used to getting things delivered that are packaged with an overkill of bubble wrap, plastic bags, or paper. The part arrived with just the part inside rattling around in an oversized box no bubble wrap no nothing, and I can say the courier did not treat it as fragile. I was half expecting to see a broken element when the box was opened. Would PartSelect replaced it without a fight?
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broil element broken
First, turn off power to oven. There are six Phillips head screws on the pan above the element and 2 securing the element to the pan. Remove all screws and pull unit toward you, then slide off electrical wires from the element. To remove the element from the pan use the pliers to bend back metal hooks. Place new element under hooks, bending the metal to hold element in place and replace 2 screws securing the element to the pan. Join wires to element and push unit with wiring back into oven wall. Replace 6 screws holding pan to top of oven, turn on power, and voila!
Other Parts Used:
-
Frederick from Snow Hill, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler Element Broken
First I removed the screws that hold the element in place. Then I removed the screws that hold the element shield on the top of oven in place. I then pulled the element out of the back of the oven about 3-4 inches and disconnected the two wires. I removed the whole assembly shield and element. Then I disconnected the element from the shield little brackets hold it in place. Took new element and fixed in place on the shield with the brackets. At this point I replaced the two screws that hold the element to oven shield. Then I took the whole assembly and reconnected the two wires. Pushed the element back into the back of the oven. Lined up the screw holes of oven and broiler shield put screws back in. And done. I might add I turned the power off to the oven before working on it.
Other Parts Used:
-
Laura from Scotts Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler element burned out and refrigerator drawer was broken
Replace old crisper drawer. Removed screws from burned out broiler element and plugged in new element. Less than 10 minutes for both jobs. Parts arrived in 2 days. Very pleased and will definitely use partselect again.
Thank you,
Marsha Gardner
Thank you,
Marsha Gardner
Other Parts Used:
-
Marsha from Glen Campbell, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broiler unit had to be replaced
The repair WOULD have been very easy except one of the wires did not come out with the broiler unit, thus the entire oven had to be removed from the cabinet, then had to be rethreaded into broiler area. Be very careful when taking out the old broiler to be sure that both wires come out with it.
Other Parts Used:
-
Don from BEND, OR
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top broil element no good.
Loosen 6 screws holding pan containing element.Pull element and pan towards the front of oven.Remove the 2 wires attached to element.Remove 2 screws holding element to pan.(Needed WD 40 to loosen screws).Replace in reverse order.So simple this caveman could do it!
Other Parts Used:
-
Kevin from Westwood, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 11, 2017
Can you confirm that this broil element will work in the above model Amana wall oven? Thanks so much
For model number AOCS3040SS
Hi John, Thank you for the question. Yes, this element is listed as the correct top broil element for the model number provided. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
August 6, 2021
Is the broil element - 240v 3000w the correct replacement for the above model? The oven is 21 years old - i realize the element is only $70, but is it time for a replacement? Thanks.
For model number AOES3030WW
Hello Terry, Thank you for writing. We have researched the model you have provided and have found
the part you are looking for is Broil Element PartSelect Number PS11744642. You would only need to replace if it burned out.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744642
Manufacturer Part Number: WP77001099
Manufacturer Part Number: WP77001099
Brand
Model Number
Description