Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Small burner full hot all the time.
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch. Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned power on. Defective switch had stuck contacts making it full hot.
Other Parts Used:
RICHARD from PARADISE, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
16 of 39 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element switch needed repair as did an element size selector.
I remoed the two screws that hold the element switch in place and replaced the attached wires in an identical manner as I removed them from the previous bad switch. It was easy and workes perfectly.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
January 18, 2018
The large burner on this stove heats except when i turn the switch to "low", then the burner goes cold. When i move the switch knob to the first indice above "low" the burner heats. I suspect the switch. Is this a good assumption ? ( all other burners are working great) this is a great stove and i really love it. Other than this little problem, the stove is great. Thank you, ms ashley hall, cornelius, oregon.
For model number ART6112WW
Hi Ashley,
Thank you for your question. Yes, you are correct. If you are trying to adjust the switch and the burner is not responding as it should, then the issue is with the switch and it will need to be replaced. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
October 15, 2019
My burner kept heating when it was in the off position. Thinking the switch is bad?
For model number Ak2t30e4
Hello Todd, Thank you for the question. Yes, the most likley issue is a defective switch that controls the element with the issue. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 14, 2020
Hello,
Looking to purchase a infinite switch for our stove top on one of the burners. Our stove top would show that one burner is still on. I am thinking that is the problem? Thoughts? Looks like your part number is ps11744436. Looking at the connection numbers they are different. Is this the correct switch? Is there a diagram showing the updated wire connections if it is the correct switch. Your help is greatly appreciated.
For model number akt3650e
Hi Mike. The right switch depends on which burner is faulty. We do not have a wiring diagram. You will need to take note of the positions of your old switch and connection them one at a time. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744436
Manufacturer Part Number: WP74011243