Door Hinge - Left or Right Side
Fits your JJW8527DDW!
$95.35
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your JJW8527DDW!
PartSelect Number
PS11744385
Manufacturer Part Number
WP74010284
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Wall Oven, Microwave Oven Combo.
This part works with the following products:
Jenn-Air, Maytag.
Part# WP74010284 replaces these:
7106P118-60, 74010284
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven door would not close tightly.
DOOR HINGE: Lifted the door out of place and layed it on the floor. Removed the six screws (three on top and three on bottom) from the door to remove the front panel exposing the hinges. Removed three screws from each hinge to remove them. Reversed the process to complete. HINGE BRACKET: Would recommend replacing these with hinges. After removing the screws that hold the oven in I pulled the oven out about four inches. Brackets are now easily removed and replaced, two screws each. Slide the oven back resecure and your done. DOOR GASKET: Just pulled it out and snapped in the new.
Other Parts Used:
-
Daniel from Rochester Hills, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
22 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Hinges Need Replacement
Once you figure out how to pop the little clips that lock the hinges in place this is not a difficult repair. But, it is tedious due to all the screws on the door.
Fold the door down and look for the tabs on the clips just above the hinge connections. You should able to push the tabs back and down with your fingers. If they are stuck use a flat blade screw driver or pair of pliers. Lift the door straight up and pull back. The hinges may pop (loud) while doing this. Set the door on the floor and proceed to remove the inner door by unscrewing all the sheet metal and machine screws. Lift the inner door out and the two hinges are accessible on either side. There are two black machine screws on the bottom of the inner door that hold each hinge in place. Unscrew those and the hinges come right out. Take the same black machine screws and use them to cut the threads into the new hinges. Remove the screws and install the new hinges. Use the black machine screws to attach the new hinges to the inner door. Reinstall the inner door to the outer. Lift the door assembly back in place on the hinge connectors at the oven. Then, don't forget to push the locking tabs back in place. The hinge replacement is complete.
Fold the door down and look for the tabs on the clips just above the hinge connections. You should able to push the tabs back and down with your fingers. If they are stuck use a flat blade screw driver or pair of pliers. Lift the door straight up and pull back. The hinges may pop (loud) while doing this. Set the door on the floor and proceed to remove the inner door by unscrewing all the sheet metal and machine screws. Lift the inner door out and the two hinges are accessible on either side. There are two black machine screws on the bottom of the inner door that hold each hinge in place. Unscrew those and the hinges come right out. Take the same black machine screws and use them to cut the threads into the new hinges. Remove the screws and install the new hinges. Use the black machine screws to attach the new hinges to the inner door. Reinstall the inner door to the outer. Lift the door assembly back in place on the hinge connectors at the oven. Then, don't forget to push the locking tabs back in place. The hinge replacement is complete.
Other Parts Used:
-
Lee from FORT WORTH, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken oven door spring
Removed door, separated deer panels, replaced spring
Other Parts Used:
-
Kent from Alexandria, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
January 30, 2018
New home that came with a jenn air wall oven. Lower door on the wall stove does not close all the way. Top stove door does close all the way. So i suspect that there is a problem with the lower stove door. Do i need two door hinges or can i get by with one? Sorry to have to ask these dumb questions.
For model number JJW9627DDB
Hi Stephen,
Thank you for your question. If your oven door is not closing all the way, the issue is likely the springs on the hinges and the hinges will need to replaced. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
William
February 25, 2018
During baking, the whole door came off the oven and too heavy to hold on, so had to lay it on the floor! I had a hired repair person and he said unable to fix due to the part is unable. I question this. After looking at your door hinge, it seems this is the part we need. Or another part?
For model number JJW9527DDS
Hi William, Thank you for the question. There were two series of hinges for this model. In order to know what series you have you need to check the serial number. If the first two numbers of the serial number are 16 or above, you can use the Part Number, PS11744385. If the first two numbers are 15 or below, then the hinge needed is the Part Number, PS801330 and is coming up discontinued. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
July 5, 2021
Will this part work on my oven listed above?
For model number JJW9827DDP SERIAL#10527653CX
Hello Steve, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744385. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
August 31, 2017
Looks like we need a door hinge for this model.
For model number JJW9627DDB and Serial: 10095357CN
Hi Dave,
Thank you for your inquiry. It looks like this would be the correct hinge for your model. You can purchase it through our website or by contacting customer service and placing an order over the phone. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744385
Manufacturer Part Number: WP74010284
Manufacturer Part Number: WP74010284
Brand
Model Number
Description