This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light
This part works with the following products:
Wall Oven, Range.
This part works with the following products:
Magic Chef, Maytag, Jenn-Air.
Part# WP74001929 replaces these:
AP6010802, 74001929
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven would not maintain temperature
Gas was turned off! Valve control cover was removed. Inlet fiting to valve was disconnected. Wires were removed from valve. Valve attachment assembly was removed. Old valve swapped out for new on attachment bracket. New attachment assembly affixed into oven. Wires connected. Valve control cover assembled. Gas turned back on and tested. Voila - cornbread the next morning!
Other Parts Used:
Gregory from Mamaroneck, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
7 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
December 9, 2017
Can this be the cause of a slight gas smell when the oven is off? The smell goes away when the gas is shut off to the oven.
For model number CWG3100AAE
Hello Henry,
Thanks for your question. The flat-style oven igniter is almost certainly the cause for this problem. Be very careful since if the gas has leaked from anywhere in the appliance, open flames would be hazardous. We would recommend getting a licensed technician to examine the unit to provide a second opinion after replacing the igniter.
I hope this helps.
Hi Lloyd, Thank you for reaching out. The Igniter Switch for this model is listed as PartSelect Number PS11744491 and PartSelect Number PS11744150. We hope this helps!
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters. ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743991
Manufacturer Part Number: WP74001929
