![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Defrost Timer - 120V 60Hz Specifications
This defrost timer will cycle for twenty-one minutes after every ten hours of run time.
The defrost timer acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Refrigerator Defrost Timer - 120V 60Hz
![Replacing your Maytag Refrigerator Defrost Timer - 120V 60Hz Replacing your Maytag Refrigerator Defrost Timer - 120V 60Hz](https://img.youtube.com/vi/MMihGjuUpnk/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Fridge too warm | Freezer not defrosting | Freezer section too warm
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Admiral, Magic Chef, Jenn-Air.
Part# WP68233-3 replaces these:
AP6010564, 63001580, 66556-8, 68233-2, 68233-3, 69543-4, 69543-6
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Christopher D - July 4, 2020
Verified Purchase
Extremely fast delivery
The part arrived the day after ordering. It was in good shape and was easily installed. Fridge defrost is now better timed.
Aline M - June 10, 2020
Verified Purchase
Easy repair, corrected the problem
Very fast shipping, next day. 10 mins to install and the refrigerator has worked great.
Francois G - August 18, 2018
Verified Purchase
Perfect Fit
Fridge is working as new (15 years old)
Robert L - July 25, 2018
Verified Purchase
Exactly what I needed to fix my fridge
Exactly (OEM) what I needed to fix my fridge. Competitive price and plain shipping option kept my costs down. Recommend the part and the seller.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Maytag Refrigerator - fridge compartment was not cooling and the freezer compartment seemed to be cooling okay
Maytag Refrigerator (new 1991): First I unplugged the refrigerator from the electrical receptacle. I then removed the front grille and used a nutdriver to remove two small screws and unplugged the defective defrost timer. I then plugged the new defrost timer in, reinstalled the two small screws, reinstalled the front grille, and finally, plugged the refrigerator into the electrical receptacle. This took less than 15 minutes to complete. Please note, you may need to manually defrost the refrigerator, at least 8-10 hours, in order for the new defrost timer to have a fresh start of a defrosted fridge.
Frigidaire Freezer (new 2005) - Replacing the Drain Pan: First I unplugged the freezer from the electrical receptacle. I then removed the four bolts holding the compressor in place using a socket and ratchet. Then I carefully pulled the compressor out of its compartment to where I could easily get to the broken drain pan. I removed the broken drain pan and installed the new drain pan. Carefully pushing the compressor back into its compartment, reinstalling the four bolts. Plugged the freezer back into the electrical receptacle. Please use caution as the compressor may be hot and being careful not to kink any of the lines connected to the compressor. This project of installing a new drain pan took me about an hour to complete. Good Luck
Frigidaire Freezer (new 2005) - Replacing the Drain Pan: First I unplugged the freezer from the electrical receptacle. I then removed the four bolts holding the compressor in place using a socket and ratchet. Then I carefully pulled the compressor out of its compartment to where I could easily get to the broken drain pan. I removed the broken drain pan and installed the new drain pan. Carefully pushing the compressor back into its compartment, reinstalling the four bolts. Plugged the freezer back into the electrical receptacle. Please use caution as the compressor may be hot and being careful not to kink any of the lines connected to the compressor. This project of installing a new drain pan took me about an hour to complete. Good Luck
Other Parts Used:
-
Dale from Ligonier, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Socket set
68 of 85 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not exit defrost mode (continual defrost)
Unplug the refrigerator. Remove face plate located in the upper back of the refrigerator compartment. Remove face place bracket on the right using nut driver. Removing these screws also frees the metal case enclosing the Defrost Timer. Pull the case away from the back of the refrigerator exposing the Defrost timer. Remove the electrical plug from the Defrost Timer. Then remove the Defrost Timer from the case by removing the two screws securing it. Reverse the procedure to install the new Defrost Timer.
Other Parts Used:
-
Leon from Chaparral, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
44 of 55 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer and food compartment not working!! Warm.
Spoke to Rep.Advised that several parts might be involved. Replaced 3 recommended parts and frig works like brand new. Saved hundreds of dollars in repairman costs.l. Plus $1000.00 for cost of new frig. If you can walk and chew gum at the same time? Easy fix. Very skilled Rep's!! Excellent service!! Great prices!! Highly recommend!!
Other Parts Used:
-
David P. from DINGMANS FRY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
March 5, 2018
How can you test the defrost timer to see if it works?
For model number MTB2456AE
Hello Jerry, thank you for your question. Locate your defrost timer. It can be located behind the refrigerator's lower kickplate, in the refrigerator's control panel, or even behind the refrigerator on its back wall. Defrost timers almost always have four metallic terminals extending from the bottom. Once you have found your refrigerator's defrost timer, remove it for testing. A defrost timer is usually secured inside a refrigerator with at least one screw, but sometimes more. Remove all the screws you find and pull the timer carefully out of the refrigerator. Pull it out far enough so that you can disconnect its wires. Pull firmly on the wire's connectors to remove them. You may need to rock them back and forth a little to ease the motion. Don't worry about which way the connector comes out because there is only one way it can go back in. Use your multitester to test the timer for continuity. Set your multitester to the R X 1 scale. Place one of the tester's leads on the coommon terminal. It should be labeled "3" or "C". If none of the terminals are labeled, you can locate the common terminal by determining which terminal coincides with the white wire in the connector plug. With one multitester lead (probe) touching the common terminal, touch the other lead to the other three remaining terminals, one at a time. Testing the first pair should produce a reading of zero, or near zero, denoting continuity. The second pair may also result in a reading of zero or near zero. Testing the third pair of terminals should produce a reading of infinity. Find your refrigerator's timer switch and turn it in a clockwise motion until it clicks. Use your multitester and test the terminals again in the same manner as in the preceding paragraph. In this test, one of the pairs of terminals should produce a reading of continuity. At least one pair, but maybe two, should produce a reading of infinity. One important note to keep in mind is that a pair of terminals that demonstrated continuity in the first test should now demonstrate infinity. Likewise, a pair of terminals that demonstrated infinity in the first test should now demonstrate continuity. If the test you conduct with your defrost timer does not produce these results, then you should replace the mechaninsm. I hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
September 14, 2017
What could be the cause of the refrigerator not to cool but the freezer compartment is working.
For model number CTF2125GRW
Hi Joe,
Thank you for your question. There are a couple of parts that could cause that issue. You may want to check your run capacitor, defrost timer, defrost thermostat, and your evaporator fan motor as well. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
JOE
September 14, 2017
Is it possible to check the run capacitor with a multimeter?
For model number CTF2125GRW
Hi Joe,
Thank you for your inquiry. Yes it is. You would have to set your multimeter to the lowest setting for ohms of resistance. Then calibrate it to zero. Make sure after unplugging your capacitor you release any electrical charge. You can do this with a screwdriver that has an insulated handle. When testing your capacitor set your meter to 1000 ohms. Touch your probes to the terminals on the part. If your meter stays on 0 then your capacitor needs to be replaced. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Nate
May 25, 2022
Freezer evaporator ice up temperature in freezer is 15 degrees
For model number Mtb1956geq
Hello Nate, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the evaporator fan motor, the defrost thermostat, the defrost timer, the defrost heater, and the temperature control thermostat. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
![](https://img.youtube.com/vi/bWC44fHn0As/maxresdefault.jpg)
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Scott
June 3, 2022
Refrigerator constantly runs could this be a Defrost timer?
For model number JRT1960W
Hi Scott,
Thank you for your question. If your refrigerator runs too long, there are some parts that you will need to check to see which one is causing the issue. You will need to check the condenser fan motor, the defrost timer, the defrost thermostat and the door gasket. We have included a link that you may reference on how to check these parts and some others as well. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Richard
August 24, 2017
To replace the defrost timer, the instructions say behind the grill. Where's the grill? Is it in the freezer or refrigerator compartment?
For model number RTT1900DAE Maytag
Hi Richard,
Thank you for your question. From your diagram information, it is located down below where your compressor and evaporator coils are. The grille that they might have been referring to is the grille at the very bottom of your refrigerator, sometimes called the kickplate. However if it is not there, I would suggest checking inside the control panel in your fridge. I hope that helps! Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
November 6, 2017
I want to replace the defrost timer. I have the part.(wp68233-3). I believe it may be behind the control cover in the refrigerator compartment. How do you take the cover off to access the timer???
For model number Jenn Air Model# JRSD229B Refrigerater
Hi William,
Thank you for your inquiry. There is a video listed with the part on our website that you may reference on how to install defrost timer. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Martha
June 27, 2019
I need a new fan
For model number MTF2L156GES
Hello Martha, thank you for inquiring. For your model the Condenser Fan Motor is part PS11743226 (the Blade for it is part PS1964356) and the Evaporator Fan Motor is part PS11743253 (the Blade for it is part PS2060454). We hope this helps.
Was this helpful?
Thank you for voting!
Marie
March 24, 2020
Can you help identify the needed part if i tell you the freezer is cold, the refrigerator is warm and there was a build up of ice in the back of the freezer, which i manually defrosted. Thank you.
For model number MTF2156GES
Hi Marie,
Thank you for your question. If the refrigerator is too warm, there are some parts that you will need to check to see which one is causing the issue. You will need to check the defrost timer, the defrost thermostat, the defrost heater, the relay overload kit and the compressor and relay kit. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. We hope this helps. Thank you and have a great day.
![](https://img.youtube.com/vi/bWC44fHn0As/maxresdefault.jpg)
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743747
Manufacturer Part Number: WP68233-3
Manufacturer Part Number: WP68233-3
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)