Whirlpool WP661658 - Drain Pump- 60Hz 120V | PartSelect.ca
Drain Pump- 60Hz 120V – Part Number: WP661658
Drain Pump- 60Hz 120V – Part Number: WP661658 Drain Pump- 60Hz 120V – Part Number: WP661658 Drain Pump- 60Hz 120V – Part Number: WP661658 https://partselectca.azureedge.net/Schematics/Whirlpool/BS8SMLQW.gif

Drain Pump- 60Hz 120V

2 Reviews

Your Price

CAD$87.87

PartSelect Number PS11743433
Manufacturer Part Number WP661658
Manufactured by Whirlpool

The drain pump ejects the water from the dishwasher.

This part works with the following brands: Kenmore, KitchenAid, Whirlpool, Inglis, Estate, Roper.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Not draining | Noisy

Videos For installing this part.

Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 2.9 / 5.0, 6 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
John from Mountain View, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
WP8559850, WP8268375, WP661658
Water would not drain, upper rack position couldn't be changed
Pulled out dishwasher after checking the air gap, etc. Washer would marginally pump out water and could hear motor running on drain cycle. Usual mess from water draining out of hoses.

Ohmed drain motor at 24ohms, should be 16.3 ohms from repair manual. Noted check valve, a rubber flapper, was canted out from sealing surface.

New motor ohms at 24 ohms, installed new motor prophylactilly. Installed new flapper valve through the sump. Washer checked okay for drain cycle.

Feed tube assembly was ordered as upper rack flapper valve was worn into open on upper position due to normal use. Feed tube spinner was small, so the rubber flapper was scavenged from the new assembly and used on the old feed tube assembly.
56 of 84 people found this instruction helpful.
Was this instruction helpful to you?
Truman from Atlanta, GA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP8268375, WP661658
Water was not being pumped out of the dishwasher
This site is wonderful..., thank you. Especially thanks to Nanette's detailed experience. The thing that gave me the most problem (and apparently Nanette, as well) was removing the lower round cover of the chopper assembly. Finally, some one on the internet identified the trick...put needle nose pliers in the screw-hole and pull-away. It came right out. Wish I could acknowledge the source but now can't find it.
Actually, the check valve was good, but I replaced it anyway. It was 10 times the trouble to replace than the drain pump. Wish I had started with the drain pump. By removing the drain hose, I stuck my finger in the hole and discovered the problem: the impeller was off of the pump and lying in the bottom of the drain. It was a simple thing to replace the pump. Press down on the locking mechanism and turn it to the left. When it was off, I could see that the check valve was in place and not a problem. (Of course by that time, I had already replaced it.) Good luck.
30 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Naperville, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set
Parts Used:
WP661658
dishwasher wasn't fully draining at end of cycle
Removed drain hose to ensure no blockage in drain. No blockage, then removed drain pump cap (where drain hose attaches to drain pump) with allen wrench. Push tab in on drain pump and twist counterclockwise, drain pump came off. Reversed to attach new pump and it works.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Harry from Hampden, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP661658
Dishwasher wouldn't drain; pump drain impeller had come off drive shaft.
Replaced the pump drain as one complete assembly. Couldn't do it from under the front panel as there is a small lug that you have to depress on the top of the assembly before you can twist the assembly counter-clockwise by hand. I tried but I couln't get the leverage. Had to take dishwasher out from under the unit and tip it on its side. The rest was very straightforward. If you can remove the dishwasher from under the unit easily I would suggest you don't even bother trying to change the pump drain while the dishwasher is in place. It's not worth the hassle.
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Mikel from Gaithersburg, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WP661658
After clean cycle, water was left behind
After researching the issue, it pointed to either a clogged hose or a bad pump. I cleaning the hose, verifying that there was no clog by using baking soda, vinegar and water. It would work, once maybe twice, then the water would sit again. I checked the line again, no issues. I purchased a new pump. The installation of the pump was easy, only to discover that this did NOT solve my problem. I am now considering a new dishwasher or purchasing a new $150 motor. It sucks not being able to send the parts back.
9 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Henry from Plymouth, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Parts Used:
WP661658
Grinding noise followed by dishwaher malfunction
Drained washer with hand pump. Thermo fuse had blown. Removed control panel and substituted a 15 amp automotive ATC fuse, shimming the blades with aluminum foil. Removed dishwasher from counter niche. Tipped dishwasher, removed and inspected drain pump and recirculating pump. No apparent problems noted. Temporarily rerouted supply and drain lines and restarted. Grinding noise clearly came from the drain pump. Ordered new drain pump and replaced.replaced 20 amp thermo fuse.
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
3
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66514353300
Dishwasher
Kenmore
66514353301
Dishwasher
Kenmore
66515872000
Dishwasher
Kenmore
66515874000
Dishwasher
Kenmore
66515879000
Dishwasher
Kenmore
66515882000
Dishwasher
Kenmore
66515884000
Dishwasher
Kenmore
66515887000
Dishwasher
Kenmore
66515889000
Dishwasher
Kenmore
66515892100
Dishwasher
Kenmore
66515894100
Dishwasher
Kenmore
66515899100
Dishwasher
Kenmore
66515912000
Dishwasher
Kenmore
66515912001
Dishwasher
Kenmore
66515914000
Dishwasher
Kenmore
66515914001
Dishwasher
Kenmore
66515919000
Dishwasher
Kenmore
66515919001
Dishwasher
Kenmore
66515922000
Dishwasher
Kenmore
66515922001
Dishwasher
Kenmore
66515923000
Dishwasher
Kenmore
66515923001
Dishwasher
Kenmore
66515924000
Dishwasher
Kenmore
66515924001
Dishwasher
Kenmore
66515929000
Dishwasher
Kenmore
66515929001
Dishwasher