When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice
This part works with the following products:
Refrigerator, Ice Maker.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP627792 replaces these:
AP6010134, 14214703, 627792, 628198
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water ran over into the ice bucket. Also quit making ice
Followed instructions and installed new ice maker in about 30 Minutes. It now works good.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathryn
December 27, 2017
The ice maker arm no longer stays up, therefore the ice machine constantly makes ice.Will a new arm fix this problem?
For model number KTRC22EMBT
Hi Kathryn, Thank you for the question. If there is no damage to the ice maker where the arm hooks into,then replacing the arm should fix the issue. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 18, 2024
i do not have my ice maker hooked up. I think something fell into the on/off arm. I have been trying to get the end closest to door back in. Not sure how to fix. I have a picture from inside I could send. Im afraid i could damage something if the maker is not shutting off.
For model number M1TXEMMWW02
Hi John, thank you for your inquiry. Based on the description, we would suggest checking the icemaker mounting screws if it is in place. If that is not the case, then you may have a broken ice mold, part number PS11749915. We would recommend replacing the ice mold to fix the issue. Good luck with your repair!
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743310
Manufacturer Part Number: WP627792