Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refrigerator door seal leaking and the beer was not getting cold.
Removed the inner door panel held on by 30 small nuts crews. Removed the old seal. Stretched new door seal onto inner door panel. Attached inner door panel and seal to inside of refrigerator door. Using a magnetic nut driver was the answer in the tight spots and the small nut screws. Everything works fine and the beer is cold again!
Other Parts Used:
Michael from Hilton Head Island, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
September 11, 2017
What is the step by step to install the gasket on the jenn air refrigerator door ? Thanks
For model number JCB2388DR
Hi Michael,
Thank you for the question. The first step is to remove all of the shelves and bins from the door. Once everything is removed you will need to remove the screws around the outside edge of the inside door panel. Once the panel is removed you can pull the old gasket off and reinstall the new gasket to panel. Once the gasket is lined up and on the panel you can reinstall the inside door panel back on to the door.
Some customers have removed the door from the appliance and laid it onto a flat surface. Some other customers loosened the screws around the inside panel but did not remove the panel completely, this allowed them to pull the old gasket off leaving a gap to insert the edge of the new gasket. It is your own preference.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
September 12, 2017
On your refrigerator door seal, i have a general question. Is that rubber gasket magnetized ? The current gasket on my jenn air refrigerator door no longer "sticks" when you close it, unless you really close it firmly. How does it work ? Is there a magnet in the rubber gasket that has just lost it stick after years of use ? Will your your new gasket that i just bought from your company, have a new magnetized application to it ? Where did the ability of my old gasket and where does your new gasket get the ability to stick and create that suction when you close the door ?
For model number JCB2388DR
Hi Michael,
Thank you for your inquiry. Yes, most gaskets have a magnet that helps to keep the gasket closed to the appliance. This new part would also have that. As for how your suction works it is physics: You open the door, you let warmer air in. You close the door, the air is cooled, and contracts. Thus the negative pressure and the sucking sound. That's why it's so hard to open the door immediately after you've closed it, but easier later. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743257
Manufacturer Part Number: WP61005944
