Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
November 14, 2017
I am experiencing frost buildup in ice dispenser chute. I've replaced the ice door assembly and solenoid but still have frost buildup. Could replacing your ps11743207 solve my problem. If so do i have to remove the inner door panel to install it.? thanks
For model number MSD2758GEB
Hi Rick,
Thank you for your inquiry. You can try replacing the housing, but Usually, if you are experiencing ice buildup around the ice chute, it is caused when crushed ice is dispensed repeatedly. This will eventually evaporate or you can clean the frost from the dispenser chute by using a warm cloth or sponge. If the frost is forming all the time, remove the ice bucket and try operating the dispenser with the door open to see if the flap is closing all the way. If it is not closing all the way you may need to have a service technician come out to see what is going on. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
December 11, 2018
The flap in the ice dispenser is hanging loose. When i tried to repair it i found that the place where the spring clips into on the right side has broken off. I can’t determine by the diagram which part secures the spring. Is it the housing or a different part? Thank you!
For model number Ed5rhexnl03
Hello Jeff, thank you for your question. If the part that is broken is one of the round tabs with a hole in it where the spring goes into on the housing of the dispenser area you will not be able to repair the unit without ordering a new door assembly. The dispenser housing is not a replacement part that is available from Whirlpool so we are unable to access that part. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743207
Manufacturer Part Number: WP61004681
