![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Drain Pump Specifications
This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Drain Pump
![Replacing your Maytag Washer Drain Pump Replacing your Maytag Washer Drain Pump](https://img.youtube.com/vi/fbQtjMxGFfo/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Burning smell
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, International, Jenn-Air.
Part# WP6-2022030 replaces these:
AP6009844, 2-0724, 2-11054, 2-2203, 2-2204, 2-2532, 2-2540, 2-737, 200724, 200737, 202203, 202204, 202532, 202540, 211054, 6-2022030, 8100-203, J85-510, WP6-2022030VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Vincent P - December 9, 2022
Verified Purchase
Easy repair to keep my Maytag washer running
This part was a perfect replacement for my old Maytag washer that stopped draining water. It's easy enough to DIY saving me a bunch on labour (or worse, replacing the entire washer).
Holly B - August 13, 2021
Verified Purchase
So thankful I found you guys!
The part was exactly what we needed. Super easy and great customer service. Will be using you guys again
Dale A - June 1, 2021
Verified Purchase
Easy website to use, fast service and part worked perfectly.
Part was exactly as described and delivery was very quick. Washer is working perfectly.
Harold C - July 25, 2019
Verified Purchase
Recieved on time. Works as expected
Appliance is back to working order.
Barbara P - August 17, 2018
Verified Purchase
Drain pump # PS11743017
Delivery was quick and the part was great. Easy installation, my maytag is now working.
Tim W - August 14, 2018
Verified Purchase
Very easy repair
The part came in and within a few days of ordering it I had it installed. It went quicker than I expect it. Thanks for everything. This is my place to shop from now on. Great job.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 25 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaking water
Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.
So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.
Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.
Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.
Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.
Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
Other Parts Used:
-
Joseph from Plano, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
201 of 228 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was not being removed from the wash tub after the spin cycle
I loosened three screws to relieve the belt tension and removed the belt from the pump drive pulley. After removing the water from the wash tub I removed the intake and output hoses from the pump. I next removed the mounting screws and removed the pump. I attached the new pump loosely and re-attached the belt. I moved the pump to tighten the belt tension and tightened the mounting screws. I re-attached the hoses, filled with water, checked for leaks and replaced the front panel.
Other Parts Used:
-
John from Fort Lauderdale, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
49 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Strange noises - drum not always emptying
Found a very stretched, loose pump belt. Was able to pull it off pump pulley and motor pulley easily. Pushed motor assembly toward transmission pulley and removed wider drive belt. Wiped all pulleys clean. There's a double on the motor- one for drive belt, one for pump belt. Removed two hoses from pump using nutdriver. Removed pump. New pump installed. Installed two hoses on new pump. Installed drive new drive belt. Installed pump belt last. Slid pump to near farthest spot in slots. Tested for correct tension by pinching pump belt. Should be able to pinch center so two pump belt sides come within 1/4" of each other just as the spring tensioned motor mount starts to move. Pused washer back into place after external hoses connected. All new hose washers and filters on both hot and cold. Ran, checked for leaks - none! Absolutely perfect. Put front panel back on. No weird noises and drum empties perfectly every time. My wife is so pleased she's doing more loads.
Other Parts Used:
-
Kenneth from Sunnyvale, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
26 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wouldn't let the water spin out!
I was told that it might be a clog in the tube.. we check the tubes that wasn't it Then I Google it and was told it might be the drain pump. I was just glad that Part Select had what I need because my machine is over 20 years old. We change the pump and now I hope I get at least another 20 years out of my machine. I will always use part select to get my parts. Thanks
Other Parts Used:
-
SHARON from DETROIT, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
22 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak
Tilted the washing machine back at 45 degree angle. Removed three screws from the underside of machine. Slipped belt off pump. Lessened two hose clamps and removed hoses.
Lifted old pump out. Dropped new pump in place.
Screwed in the 3 screws. Slipped on the belt.
Attached two hoses. Tightened hose clamps.
Set washing machine upright.
No more leak.
My problem was I could not prove the pump was the source, but after switching it out I have had no problems (good enough).
Lifted old pump out. Dropped new pump in place.
Screwed in the 3 screws. Slipped on the belt.
Attached two hoses. Tightened hose clamps.
Set washing machine upright.
No more leak.
My problem was I could not prove the pump was the source, but after switching it out I have had no problems (good enough).
Other Parts Used:
-
richard from Tarzana, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pump starting leaking around the center portion.
The hardest part was figuring out how to get the front panel off of the washer. Once that was done, the pump came off easy.... 3 screws attached it to the bottom panel and 2 hose had to be disconnected. Putting the new one in was easy.
Other Parts Used:
-
Kenny from Covington, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
11 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer did not drain.
Took front panel off. Ran machine. Pump is see-through. Could not see any "aeration" of the water in the pump and no water was coming out of drain hose. Disconnected electric. Disconnected hose from drum to pump(first emptied ALL water from drom)and drained in bucket. Disconnected drain hose from pump to drain and drained any water. Checked for obstructions in hoses. Removed pump. Checked belt (was fine after 14 years). Ordered new pump. Received the next day! Replaced pump and tighten belt. Connected hoses and test it. All OK. Replace panel and did laundry.
Other Parts Used:
-
Basil from St. Charles, MO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Standing water in washer tub
Thinking the water pump was not doing its job in removing all of the water after the rinse cycle, I replaced the water pump.
1. Unplug washing machine.
2. Remove front cover (2 screws).
3. Pull belt and hoses off pump body (watch for water in drain hose!).
4. Remove 3 screws holding pump to bottom pan. 5. Reverse process with new pump.
This job is straighforward, and it helps to have 2 wood blocks to prop up the front of the washer.
Unfortunately, this didn't fix my problem. Actual cause of the water in the tub was a leaking inlet valve (solenoid assy).
1. Unplug washing machine.
2. Remove front cover (2 screws).
3. Pull belt and hoses off pump body (watch for water in drain hose!).
4. Remove 3 screws holding pump to bottom pan. 5. Reverse process with new pump.
This job is straighforward, and it helps to have 2 wood blocks to prop up the front of the washer.
Unfortunately, this didn't fix my problem. Actual cause of the water in the tub was a leaking inlet valve (solenoid assy).
Other Parts Used:
-
James from Baton Rouge, LA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking from under the front of the washer when it was used.
After turning the water off and unplugging the machine, I took the front panel off the washing machine. I then slipped the belt off the pump sprocket. The pump was right in the front and easy to remove. All I needed was a screwdriver, for the hose clamps, and a 5/16" socket to remove the old pump. I then installed the new pump, with the existing screws, re-attached the 2 hoses, slipped the belt back on, and popped the front panel back into place. The new pump works great and the leak is gone. The whole job onlt took about 30 minutes.
Other Parts Used:
-
Greg from Manhattan, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old pump was beginning to drag due to the age of the washer.
Removed the front panel. Then blocked up the front of the machine. Removed the pump belt. Removed the 3 5/16" screws from the bottom of the old one and tilted it slightly to remove. Put the new one in and reinstalled the 3 screws. Put the belt back on and slid new pump all the way to the right and tightened 1 screw. Loosened the screw until there was about 1/4" of gap when squeezed the belt together. Tightened the one screw, then the other 2. Put the front panel back on and lowered the machine. New pump works great.
Other Parts Used:
-
Howard from ALBRIGHT, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerry
October 14, 2017
The pump pulley came off the washer. Is this a factory mounted pulley attached to the pump permanently or is it attached by a bolt? Can i just bolt it back on or would i have to replace the entire pump assembly? Thank you.
For model number Maytag lse7806acq
Hello Gerry, thank you for contacting us. You would need to replace the whole pump as that pulley is not sold separately or removable. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
April 27, 2018
When the belt is disconnected will the water pump turn freely or with some resistance?
For model number A712
Hi Richard, Thank you for the question. The pump should turn freely with a bit of resistance but should still be fairly easy to turn. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Milton Ahner
August 29, 2017
Does the pump in this model wash machine control the water staying in the tub as its filling? Is there any chance that the drain could siphon the water out of the tub as its filling, or is there a check valve to hold water in the tub?
For model number A512S serial no. 171539
Hi Milton,
Thank you for the question. I would start by making sure you do not have a siphoning issue.
First check to make sure the drain house is not pushed into the home drain. Then check to make sure the home drain is not plugged or blocked. Some people stuff a rag or paper towel around the gap between the hose and the drain hole thinking it will make the hose fit into the home drain more secure. There needs to be air flow between the drain hose and the outside diameter of the drain hole.
It is also a good idea to check the Siphon Break Kit and the Siphon Break Elbow Kit with Clamp. Make sure they are not cracked or damaged or nothing could be blocking them.
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ross
February 25, 2019
Q#1 how old is my machine? It's actually my moms and i'm trying to help her either fix or replace her machine.Q#2 it was overloaded with a big comforter and just stopped doing anything after emitting a burning belt smell, i want to diagnose the problem but the tub is really full of water. how do i get the water out, so i can figure out what's wrong without spilling water everywhere?
thank you for your support ;-)
For model number LAT7304AAE
Hello Ross, Thank you for contacting us. Please submit a follow up including the serial number of the unit so we can determine the age. If unplugging the unit and plugging it back in after 1-2 minutes does not force the water to drain, try to move the timers into the spin cycle so it can drain. If that fails then you would have to manually empty the water. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ross
February 26, 2019
This is a followup question. How old is my Maytag washer? Serial # is a0132943ks
For model number LAT7304AAE Maytag washer
Hello Ross, Thank you for the question. According to the serial number this product may have been manufactured August of 1994. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
May 10, 2019
Hi, i have a problem i hope you can help me with. My washer will not complete a cycle. It agitates fine. But when it starts into the spin cycle, it starts then promptly stops. I don't have a meter. Please help!
For model number LAT8240AAW
Hi Linda, thank you for your question. When you appliance will not advance there are a few parts that you should check. You should take a look at your lid switches and your timer itself. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
January 25, 2019
When washer goes to spin the hose connecting to water pump collapse and won't drain, could it be the pump or the hose.
For model number mat12PDLAW
Hi Nancy,
Thank you for your question. If the hose is collapsing, it may not be fastened tightly. This can restrict water flow and increase the pressure on the hose. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 12, 2017
My machine leaks a small amount of oil. Do i need to worry about it running out of oil
For model number A107A
Hi Joe,
Thank you for your question. Yes, eventually you would run out of oil in your machine. How fast that occurs depends on how much oil you are leaking. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry Lund
February 11, 2018
Clothes are still extremely wet after spinning. I have replaced belts, spring kit. If i pull the motor towards the front of the machine, (you can hear and see it spinning faster), during spinning it spins out the water fine, so do not think its the drain pump. Any help will be very appreciated
For model number LAT9706AAE
Hello Terry, thank you for your question. There is a speed control switch on the control panel that might be stuck, or not functioning. I would recommend checking that part first, and if that part is functioning properly you might want to check and/or replace the motor, and drain pump. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
July 12, 2023
Washer leaks water while spinning/draining and even when.letting clothes sit in the soak cycle and lifting the lid for awhile. Starting to get loud as if a bearing is failing as washer spins to drain. I haven’t been able to pull the washer out and look closer but I suspect the drain pump could be an issue along with the main tank seal/bearing. Any suggestions on anything else to look at or replace?
For model number LAT2500AAE
Hello Doug, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the tub bearing kit, part number PS2347235, to fix the issue. The tub bearing kit is fastened in the middle of the outer tub of your washer. The tub bearing ensures the inner tub is spinning effortlessly. If the rub bearing is faulty, it might leak water and become noisy. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743017
Manufacturer Part Number: WP6-2022030
Manufacturer Part Number: WP6-2022030
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)