Product Description
Door Hinge - Left or Right Side Specifications
Used with Stainless Steel model Only. Includes coiled spring and can be used for either Left or Right side of appliance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Microwave Oven Combo, Wall Oven.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP4455526 replaces these:
4452343, 4455526
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jeffrey M - February 18, 2020
Verified Purchase
Easy repair problem solved as described. Oven door did not fully close.
The door hinges worked perfectly. Your part quote said required when door does not fully close 80% of the time.That was completely accurate. The part took 20 minutes to install. fit as the new part did, no fiddling around.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven door was not closing completely.
Removed the oven door from the oven using the KitchenAid supplied tool to hold the spring in position. There was a hole at the bottom of the hinge and if you insert this KA tool it would keep the hinge from closing completely which allowed you to pull the door away from the oven. Removed the 4 screws that held the front (glass cover) from inside part of the oven door.
Used the pliers to pull the hinge back to remove the KA tool and then unscrewed the 2 screws holding the hinge in place. Did the same on the other side. Installed the hinge into place and re-installed the glass front of the oven door. Place the oven door into the oven and when you open the door completely (down) the 2 holding pins are removed - similar to the KA tool.
Took about 30 minutes from start to finish. Used the parts list (found online) to see what screws I had to unscrew.
Searched online found PartSelect had good price, confirmed over the phone that the hinges were not a set (needed 2). Completed order online and part delivered in 2 days. Have used PartSelect twice for me oven. The Kitchenaid oven is another story - horrible - thank goodness for PartSelect.
Used the pliers to pull the hinge back to remove the KA tool and then unscrewed the 2 screws holding the hinge in place. Did the same on the other side. Installed the hinge into place and re-installed the glass front of the oven door. Place the oven door into the oven and when you open the door completely (down) the 2 holding pins are removed - similar to the KA tool.
Took about 30 minutes from start to finish. Used the parts list (found online) to see what screws I had to unscrew.
Searched online found PartSelect had good price, confirmed over the phone that the hinges were not a set (needed 2). Completed order online and part delivered in 2 days. Have used PartSelect twice for me oven. The Kitchenaid oven is another story - horrible - thank goodness for PartSelect.
Other Parts Used:
-
Michael from Manalapan, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not close all the way
Simply removed door with screw driver. Cleaned glass while apart and installed new hinges . Parts were delivered on time and fit perfect. I would recommend this company to everyone
Other Parts Used:
-
tony from El Dorado Hills, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bent oven door hinges
The owners manual described the door removal. The removal requires door pins to de-tension the springs. I did not have them, but the manual sugested using hex wrenches which worked fine. Once the door was removed, it could be dissassembled, and the springs replaced.
Other Parts Used:
-
ernie from hampshire, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Duncan
July 30, 2019
Multiple sets of part WP4455526 hinges have been replaced on my oven. They last less than 6 months. Do additional parts, the part that receives the hinge, need to be replaced?
For model number KEMS307GBS
Hi Duncan,
Thank you for your question. The only parts that you should need would be the hinges. If they are only lasting a short period of time, they may be under warranty with the company you bought them from and you will need to check with them to see if they can replace them for you. If you ordered the part through us, please contact us either by email at customerservice@partselect.com, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST or by calling our customer service line at 1-888-738-4871 and anyone would be happy to assist you. Please provide your model and serial numbers from your oven, so we may process the warranty refund for you. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742642
Manufacturer Part Number: WP4455526
Manufacturer Part Number: WP4455526
Brand
Model Number
Description