Product Description
Washer Timer Specifications
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Kenmore.
Part# WP3953248 replaces these:
AP6008926, 3953248, 3953248R
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Christian D - April 25, 2019
Verified Purchase
Quick delivery and the part worked as expected.
The part was delivered quickly, installation was easy and my washer works again--yay!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer switch had gone bad and would not move into rinse cycle
I watched the video on how to do it and I did the same. Easy peasy!
Other Parts Used:
-
Donald from GAHANNA, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
November 9, 2018
Main timmer won't pull out with the knob, will if you reach behind and push the shaft toward you?
For model number 110.20912990
Hi Scott,
Thank you for your question. It sounds like it may not be properly positioned behind the control panel. You should check the supports that hold it in place to verify if it is in the proper position. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
December 30, 2019
Not sure if you keep history of questions so to recap i sent in question regarding a tub that would not drain after cleaning cycle. I thought remedy might be timer and or lid switch which i did order from you. When you replied to my question you recommended replacing the water pump and check drain hoses for blockage. I've since checked all the drain hoses and removed the water pump. I can turn the water pump and can see impeller turning inside, however, there seems to be some resistance. Additional i can turn (with my bare hand) the metal drive shaft which drives the water pump. I have a visual on the impeller and inside of pump as i turn it. I do not see any debris that could be affecting it's operation. I will order the pump if you still feel that is/maybe the issue. Thanks much awaiting your reply.
For model number 11020924990
Hello Mike and thank you for writing.
The water drain pump would be your next step, however as you ordered the timer and lid switch see if that will fix the issue and if it does not then you can replace the pump. We hope this makes sense. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marty
June 6, 2019
Timer will not advance to spin cycle
For model number 110 20902991
Hello Marty, thank you for inquiring. For this symptom you will want to consider either the
Lid Switch Assembly part PS11742021 or the Washer Timer part PS11742067. We hope this helps.
Was this helpful?
Thank you for voting!
Mike
December 28, 2019
After cleaning cycle(agitation) water will not pump out. I manually advance the timer to rinse and or spin and it does nothing with water still in tub. Given the trouble shooting information i have read on this site i determined the remedy was the washer timer or lid switch assembly. I have ordered both. Can you recommend any other possibilities? I considered the cycle selector switch / rotary switch. P/n wp10168257. Thanks.
For model number 11020924990
Hello Mike and thank you for writing.
It seems more likely that the direct drive pump PS11741239 might be damaged and needs to be replaced, however, check your drain hose first to make sure it is not plugged with debris. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742067
Manufacturer Part Number: WP3953248
Manufacturer Part Number: WP3953248
Brand
Model Number
Description
Kenmore
1102087299
Washer
- Kenmore Washing Machine Model 110.2087299 (1102087299, 110 2087299) Parts