NOTE: Does not have threaded mounting holes. The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# WP3949339 replaces these:
AP6008881, 3949339
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My washing machine would randomly stop in the middle of a cycle. It washed, but wouldn't rinse ... or I would start it and the water would flow 5 minutes later.
We removed the front control panel by removing four screws (two in the front, two in the back) and lifting it off the machine. The timer was then evident. Upon examining the new part, it was clear that this was a "plug in". We removed the two screws that held the timer in place, unplugged the old one, plugged in the new one, replaced the screws, repositioned the panel on the machine, replaced those screws, and we were all set.
We would not have been inclined ordinarily to fix these types of things ourselves. It was a terrific experience. It saved us money, and the service was fantastic. I sent in my problem on a Thursday, and by Friday night, the machine was working again!
Thank you!
Other Parts Used:
Linda from Norwalk, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
30 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stopped in the middle of cycle
This was a very easy repair, it was obvious what the problem was based on the symptoms. The one mistake I made was not ordering the part of this site at the beginning. I ordered the part from a competitor and the part was defective so I had to return it which was painful. I placed a order withhis sitet the part came in and the washer is back up and running like new. Going forward I will only order parts from this site Than you Auburn MA.
Other Parts Used:
Dean from AUBURN, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Washington
October 29, 2017
Washer not completing cycle. Stops then starts again further into cycle
For model number LSR7233EW0
Hi Washington, Thank you for the question.If the timer is skipping cycles I recommended replacing the timer switch. Hope this helps!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Deb
August 17, 2021
My washer started to agitate as it is filling and runs through all the cycles but when it is spinning it squirts water so the spun clothes are very wet when it stops
For model number LSR5232LQ0
Hello Deb, thank you for your question. We have researched the model you have provided, and it sounds like the part number PS11742079 is the correct part for your appliance. We hope this helps!
Was this helpful?
Thank you for voting!
Chris
August 22, 2023
Does this timer assembly including the metal shaft that the knob screws onto? In mine, the shaft is spinning freely. Do I need a whole new timer assembly, or could replacing the shaft be a cheaper fix? Is that part available?
(would you repair this 20 year old washer if the part is >$200?)
For model number Whirlpool GSQ9611KQ0
Hi Chris, thank you for your inquiry. The correct part number for your model is PS11742075, the one that you have attached to this email is not for your model number. Yes the shaft comes with the timer, it is not sold separately. By fixing this washer you just might get another 20 years out of it :). We hope this helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Washer-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WP3949339","title":"WP3949339","url":""}]
