Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Melissa A - February 26, 2023
Verified Purchase
easy repair, part was same as a\stock part
the part arrived quickly and was easy to install. This part was the same as our broken stock part.
★★★★★
★★★★★
Wayne C - April 11, 2020
Verified Purchase
easy repair
easy repair fast delivery
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher was overflowing
dropped the new float in, works like a charm
Other Parts Used:
bryant from melbourne, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
12 of 57 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terri
February 21, 2019
I unscrewed the float and pulled it out to clean it. Is it supposed to screw back in tightly or "float" on top of the channel piece?
For model number DU920PFGB1
Hello Terri, Thank you for the question. It should be able to float with the water when it fills. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
August 20, 2019
Old float popped out. Item number wp3376397. The nut is still in the shaft. Can the nut be removed by opening through the kick plate? Is the nut attached to the switch? By opening the bottom panel and accessing the switch can the old nut be removed or can it be reattached to the float? Do i need a new assembly unit? I really need help here as no one else can seem to answer this question. Many thanks, linda
For model number du920pfgq3
Hello Linda and thanks for writing.
We believe this is a concern you need to address with the manufacturer. We are a company that simply sells replacement parts. We do not manufacture any units, provide technical support, authorize substitutes, or fulfill warranty claims. Please make contact with your manufacturer directly.
Here is a link to your manual
https://www.manualslib.com/products/Whirlpool-Du920pfgq3-2933280.html
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chad
January 1, 2018
Dishwasher keeps filling up with water even when you open up the door.
For model number du920gwdg3
Hi Chad, Thank you for the question. You can try to turn the power off to the appliance to see if the water is still filling up, if so you have a defective Water Inlet Valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water i...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741331
Manufacturer Part Number: WP3376397
