This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Amana.
Part# WP27001146 replaces these:
AP6007476, 27001146
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water constantly leaking in tub after cycles were complete.
Unplugged electric cord from wall receptical, pulled drain hose out of wall drain, removed both water hoses from back of washer, unscrewed the metal plate that is around the water outlets from the back of the washer first and then from the valve itself. I pulled the part as far out of the washer as I could and removed the wire connectors from hot and cold side of valve, then used pliers to loosen clamp from around the rubber hose coming from inside the washer making sure not to drop the clamp down into the backside of the washer. Repeated all of those steps in reverse to reconnect the new valve and shizzam! No more leaking inside the tub when cycles are complete! Who says a girl can't fend for herself? Once again..thank you to "PartSelect" for guiding me in the right direction and saving us a lot of money :)
Other Parts Used:
Sharie from Panama City, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Aaron
November 23, 2021
I replaced the water pump, idler pully, and belt. I then plugged it in and there was nothing, no water, no sound. There is power running to the timer, and power running to the inlet valve, but no water. Could the inlet valve be responsible for this?
For model number SAV2555AWW
Hello Aaron, Thank you for the question. This could indicate a defective valve. We suggest testing the Valve with a Multimeter. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!
Was this helpful?
Thank you for voting!
Anthony
August 27, 2022
Water will not run in. Will fill using hose only. And then it operate.
For model number Sav3710aww
Hello Anthony, thank you for contacting us. The water inlet valve (part number: PS11740591) is responsible for filling the washer with water. It can fail both electrically and mechanically. When defective, water will not fill the washer and it is recommended to replace it. Please feel free to reach out if you need any further help, our customer service is here to assist.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740591
Manufacturer Part Number: WP27001146