Ice Cutter Grid Complete Assembly
Fits your 10689489996 Ice Maker!
$347.80
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 10689489996 Ice Maker!
PartSelect Number
PS11740334
Manufacturer Part Number
WP2313637
Manufactured by
Whirlpool
Product Description
Ice Cutter Grid Complete Assembly Specifications
Used with freestanding ice makers.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Ice Maker.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore, Jenn-Air.
Part# WP2313637 replaces these:
AP6007223, 2185614, 2217280, 2313601, 2313637, W10218012, W10536696
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard B - April 22, 2019
Verified Purchase
Part was Broken
Product was as described and correct. However, certain components were broken on the new part so I had to switch them out with pieces of old part.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Grid Assembly had a broken wire and would not separate the ice sheets into cubes
I removed the 2 screws on each side of the grid and disconnected the electrical plugs attached to the grid. I slid the broken unit out. I then carefully slid the new unit in making sure not to pinch any of the electrical wires. I replaced the mounting screws, plugged the 3 connectors back into place and turned the ice maker back on. I had ice cubes within a couple of hours
Other Parts Used:
-
Brad from Bakersfield, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
33 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wires in the cutter grid assembly were briken
Replaced the assy. But, I would have been happier if you sold just the wires. I could have replaced the wires at a much lower cost and may have taken less than an hour to replace the wires.Still happy - the ice maker works.
Other Parts Used:
-
Tony from HOUSTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cutter on Ice Maker failed and needed to be replaced
I completely broke down the unit cleaning or replacing any part with rust. The replacement grid assembly (cutter) came from partselect within days of ordering. I was able reassemble the unit with the new grid assemble. Now have fresh ice. Thanks Partselect... you made this do-it-your-selfer very HAPPY! My wife cannot beleive I got the unit back together.
Other Parts Used:
-
Thomas from Powell, OH
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver
4 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ice cutter grid
Unplugged the unit. Removed 2 screws to remove front cover to access the cutter grid.removed 2 screws to the cutter grid, unsnapped power connector and removed broken grid. Slid new grid in place, reconnected power connector, replaced screws, plugged in ice maker and slid back in place. Very easy!!!
Other Parts Used:
-
John from NORMAN, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced defective parts
had to have a strong box on the floor to support the double oven when removed. lot's of screws and wires to contend with.
Other Parts Used:
-
Lawrence from Houston, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
2 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the ice cutter grid.
The real difficulty is removing the screws. Even with a nut driver the space available makes them difficult to remove. I went to the hardware store and replaced the screws with screwdriver slots for re-installation.
Other Parts Used:
-
Thomas from PHOENIX, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
May 3, 2019
What voltage should be delivered to cutting wires? Also, what should the resistance be on this part?
For model number Kuic15ntrs1
Hello Stephen, Thank you for the question. The voltage to the grid should be 9.4Vac. The grid cutter should read closed for continuity. Very sorry but we do not list the resistance for this grid. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jayme
June 27, 2019
Will the kuic15lnxs0. Work
For model number KUIC15NLXS
Hello Jayme, thank you for your question. The cutter grid PartSelect Number: PS11740334 is the compatible replacement unit for your model. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Massimiliano
June 28, 2021
My ice maker is making ice slowly (a separate problem), but when the slab move onto the grid, it is taking a long time for grid to cut the cubes. In some cases, the next sheet will move onto the grid before the previous is finished. So, it seems to be cutting the cube, but slower than normal. Any thoughts on how to diagnose/repair?
Thanks,
Max
For model number KUIS18NNJB8
Hello Massimiliano, Thank you for the question. We suggest testing the Evaporator Thermistor. At room temperature the resistance should be 10,200 to 12,600 ohms resistance. To get a more accurate reading you will need to place the thermistor in ice water for approximately 5 minutes. At 32 degrees Fahrenheit, the reading should be 30,200 to 37,000 ohms resistance and at 0 degrees Fahrenheit the reading should be 81,000 to 99,000 ohms resistance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Sam
April 23, 2019
Ice maker hardly making ice despite 2 cleaning cycles and lots of troubleshooting. It seems that the ice slab doesn't slide fully on to cutter grid and then the water runs over the slab and into the ice tank. Do i need a new cutter grid assembly, or what do you suggest?
For model number KUIA15NRHS8
Hi Sam, thank you for your question. You may need a new assembly. You may also want to double check that your water inlet valve is running correctly as well. If those parts are fine then it might actually be your control that is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bobby
December 11, 2021
I noticed a piece of the wire cutter is broke in a spot. The ice maker has basically quit making ice. I’m guessing the brake in the wire cutter is the cause? Do I need an entirely new grid cutter assembly or just a new wire cutter? Thanks!
For model number KUIS18NNTS1
Hello Bobby, Thank you for the question. The individual Ice Cutting Grid Wire can be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740334
Manufacturer Part Number: WP2313637
Manufacturer Part Number: WP2313637
Brand
Model Number
Description