Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lost the digital display (LCD)
We had electrical storm and lost power. When it returned the cable box and the Frig display didn't come back on. I disassembled the Frig door panel to view the assembly. With an educated guess I ordered the control board. It took approx 10 minutes to install. It works as it should.
Other Parts Used:
Benhard from Newnan, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
23 of 50 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
August 12, 2019
The ice dispenser will only activate and dispense ice when crushed ice is selected. When cubed is selected, the hatch will open and a clicking noise can be heard but the motor will not run. Could it be the control bird relay malfunctioning?
For model number GS6NBEXRS00
Hello Chris, thank you for inquiring. Yes, this could be due to a faulty Dispenser Control Board part number PS11740234 for your model. You may also want to consider the Ice Dispenser Door Motor part number PS11749796. Good luck with your repair!
Was this helpful?
Thank you for voting!
David
November 20, 2018
The power to my KitchenAid ice maker and water dispenser is no longer working. Nothing powers the screen, nor will it make ice. The electrical lines appear in good order, and the refrigerator/freezer are cooling properly. I replaced part #14 in the repair parts sheet for the dispenser; however, that did not have any effect. Is part #12 dispenser control board the one that i need to replace instead? Thanks.
For model number KSCS25FVMS03
Hi David,
Thank you for your question. If the dispenser is is no longer working, then you will need to replace the dispenser control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
