Rear Bearing WP22003441

Official part for Maytag, International, Jenn-Air

★★★★★
★★★★★
(1)

A Bit Difficult 

More than 2 hours 

11739437-1-M-Whirlpool-WP22003441-Rear Bearing
Part Location Diagram of WP22003441 Whirlpool Rear Bearing
See part 1 in the diagram
( Grid squares measure 1x1 inch )
11739437-1-S-Whirlpool-WP22003441-Rear Bearing 11739437-2-S-Whirlpool-WP22003441-Rear Bearing 11739437-3-S-Whirlpool-WP22003441-Rear Bearing Part Location Diagram of WP22003441 Whirlpool Rear Bearing
Proudly Canadian
OEM badge Official OEM Part
$27.69
In Stock

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Rear Bearing Specifications

This part is located near the tub's brake assembly.
Part #WP22003441
Manufactured by Whirlpool for Maytag, International, Jenn-Air

You May Also Need

Because heroes deserve fewer surprise re-installs.

$50.55
In Stock
$97.91
In Stock
$123.05
In Stock
No Longer Available
No Longer Available
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

A Bit Difficult 

More than 2 hours 

Rated by verified customers

Works with the following products:
  • Washer
  • Washer Dryer Combo
  • Dryer
Part# WP22003441 replaces these:
AP6006364, 2-0720, 2-720, 22003441, WFR105645, WP22003441VP, Y200720

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
1 Review
5.0

Out of 5

  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
ANDRE S - December 5, 2018
  Verified Purchase
Quality and service
Parts came in early and are all in excellent condition.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

A Bit Difficult 

More than 2 hours 

Average repair rating from 3 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
No spin. Pump working. Smell of burning rubber.
133 of 178 people found this instruction helpful.
  • John from Spring Valley, CA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I determined that the spin bearing was bad and decided to replace the brake too. Placed the machine on its side and then removed the rubber cap, v-belt, screw, drive lug and pulley. Then used a chain-vise grip to turn the brake off with the aid of a 3 foot long pipe extender for leverage. Blocked up the tub to align the transmission and installed the new spin bearing, brake, pulley and drive lug. Adjusted the drive lug position to contact the ccw motion of the pulley at the point when I could just feel the brake pressure. Installed the screw and rubber cap. Replaced the drive belts. Tested and all works. Halleluah!
Read less
Was this helpful?
Thank you for voting!
Washer made screeching sound during spin cycle. Also, the clothes were still very wet at end of spin cycle.
7 of 8 people found this instruction helpful.
  • Edward from EUCLID, OH
  • Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I used two vise grip wrenches in place of specialized tool that is no longer available. I put the vice grip wrenches on the brake assembly and hit them alternately with a hammer. I also used penetrating oil.

Note, the parts package stated made in USA but the bearings had China stamped on them.
Was this helpful?
Thank you for voting!
Washer making high pitched squeal at stopping of spin cycles
7 of 9 people found this instruction helpful.
  • Chad from BOERNE, TX
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Socket set
My washer is apparently 37 years old. I bought it used in the 90’s and have had to do little or nothing to it repair wise. It started to make a loud squeal/squeak when the spin cycle stopped. I watched a couple videos showing the brake assembly, bearings and belt replacement and was able to find parts. However, one bearing appears to no longer be made (just repacked with heavy duty grease) and the special tool is nonexistent. I read others using a chain clamp vise to remove the brake assembly and bought a 20 inch chain clamp vise and a 3 set variety of vise grip pliers for about $20. They make an 18 inch chain vise but glad I got the 20 inch. I used two vise grip pliers to clamp chain around notch two notches that the specialty tool would normally grab. It was a cumbersome getting in there to whack the pliers with a small sledge hammer so I got a approx 18 inch 2x4 and cut a notch at the end to keep chain vise from digging into bottom of washer and whacked the end of the 2x4. Seemed to work ok and did the same to tighten back after replacing break assembly. Got it out back together and no more squeal.
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP22003441
Brand
Model Number
Description
Maytag
A100S
Washer - Top Loading
Maytag
A101
Washer - Top Loading
Maytag
A102
Washer - Top Loading
Maytag
A102S
Washer - Top Loading
Maytag
A103
Washer - Top Loading
Maytag
A103S
Washer - Top Loading
Maytag
A104
Washer - Top Loading
Maytag
A105
Washer - Top Loading
Maytag
A106
Washer - Top Loading
Maytag
A106S
Washer - Residential
Maytag
A107
Washer - Top Loading
Maytag
A107S
Washer - Residential
Maytag
A108
Washer - Top Loading
Maytag
A108S
Washer - Residential
Maytag
A110
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A15CA
Washer
Maytag
A15CM
Washer
Maytag
A15CT
Washer
Maytag
A16CA
Washer
Maytag
A16CM
Washer
Maytag
A16CT
Washer
Maytag
A17CA
Washer
Maytag
A17CM
Washer
Maytag
A17CT
Washer
Maytag
A180
Washer - Top Loading
Maytag
A181
Washer - Top Loading
Maytag
A182
Washer - Top Loading
Maytag
A183
Washer - Top Loading
Maytag
A18CA
Washer
Rear Bearing
$27.69
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.