Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 23, 2019
The only two water levels that i can get is large or xlarge no matter what the setting is. Cannot do a small or medium load with correct water level. What part do i need to fix that?
For model number LAT3500AAE
Hello Jerry, thank you for inquiring. This is most likely due to a faulty Water Inlet Valve, part number PS11739359 for your model washer. You may also want to consider replacing this Water Level Pressure Switch, part number PS11739308. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Graham
August 31, 2022
Our washer level selector has become "iffy". It sometimes works and sometimes doesn't. I suspect its the selector switch since retrying the switch usually makes it work.
For model number LAT3600aae
Hello Graham, thank you for contacting us. Before replacing the water level switch you need to check it for continuity. You will need a multimeter for this test. Set the multimeter on the lower scale to read ohms. The water level switch has three terminals that are marked 7, 15, and 16 showing top, middle, and bottom terminals respectively. You will have to test terminals 7 and 15 by connecting the probes of the multimeter to them. The reading should be close to 0. Now repeat the procedure to test terminals 7 and 16. The near 0 reading will show its good health. If you are not getting a near-zero reading, it would suggest the water level switch is defective and needs to be replaced. Please feel free to contact us if you have any follow-up queries.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739308
Manufacturer Part Number: WP22001776