Dispenser Tube
Fits your A21CA Washer!
$30.54
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your A21CA Washer!
PartSelect Number
PS11738888
Manufacturer Part Number
WP214433
Manufactured by
Whirlpool
Product Description
Dispenser Tube Specifications
Bleach dispenser hose inlet.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP214433 replaces these:
2-14433, 214433
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The hot water intake valve did not function
This clothes washer is 35 years old and runs like a champ. I did notice a bit of water below the left rear and assumed that a hose was leaking. I let it go for about 6 months, until I could fit it into the "to-do" list. During that time, the hot/cold water intake valve died. I ordered the replacement hot/cold valve a month ago but noticed, upon removal of the valve, that there was significant water drip evidence around the electrical valve solenoids. The water drips caused the valve to die. Drips came from a clogged injector hose air break directly above the valve. Replaced all hoses and water level vacuum air line. Very easy process. The front drops off with two screws. The lid is off with two screws. All hoses easy to R/R. It took about 2 hours to complete. All replacement parts were perfect. My belts are fine so I'm ready for another 30 years of service.
Other Parts Used:
-
Paul from Huntington Beach, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
17 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had water leaking from beneath the washer.
I identified all the parts and ordered them. The injector hose kit was the assembly I needed to fix the leak. Looking at the comments from others that had previously made a similar repair, I decided to fab an angle bracket to hold the injector and the installation went very smoothly! All parts fit and the washer will hopefuly give us a few more years on top of the 25 already in service.
Other Parts Used:
-
Paul from Midlothian, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
8 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water drip
Remove frt cover to confirm leaks. Removed clamps and installed new hoses. Run washer to confirm repair. Washer is 58 years old and costs are less then 50.00 to fix every 4 years
Other Parts Used:
-
larry from LAKE CITY, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine was leaking
The part I removed from the washing machine was hard plastic so when the flexible hose came I was a little unsure but because of the give and stretchyness of hose it was a simple fix.
Done in five minutes.
Done in five minutes.
Other Parts Used:
-
Steven from WEslaco, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danaca
April 2, 2024
Is the dispenser tube (PS11738888) the same as the bleach tube(PS11739281)? If so which one should I order?
For model number LAT9806AAE
Hi Danaca, thank you for reaching out. According to our research, both tubes are the same, but the compatible bleach tube for your model is part number PS11739281. Please reach out to customer service if you need help placing an order!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738888
Manufacturer Part Number: WP214433
Manufacturer Part Number: WP214433
Brand
Model Number
Description