Frigidaire 316490003 - Oven Probe | PartSelect.ca
Oven Probe – Part Number: 316490003
Oven Probe – Part Number: 316490003 https://partselectca.azureedge.net/Schematics/Frigidaire/MOHEIM5W.gif

Oven Probe

10 Reviews

Your Price

CAD$54.94

PartSelect Number PS11731755
Manufacturer Part Number 316490003
Manufactured by Frigidaire

This temperature sensor detects the temperature within the oven cavity.

This part works with the following brands: Frigidaire, Kenmore, Crosley, Electrolux, Tappan, Kelvinator, Westinghouse, Gibson.

This part works with the following products: Range, Wall Oven.

This part fixes the following symptoms: Oven is too hot, Little to no heat when baking, Oven not heating evenly, Will Not Start.

Videos For installing this part.

Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.2 / 5.0, 12 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
john from spring, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
316490003
oven temp not consistent with setting
took off back cover and unplugged old unit and installed new unit. oven probe was not the issue. probally control panel malfunction of readings. will continue using oven temperatue gauge inside to get settings for temperture as temp is important for baking.
59 of 135 people found this instruction helpful.
Was this instruction helpful to you?
Tim from ASHAWAY, RI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
316490003
oven did not heat up
Replaced the probe because that's what this site recommended.The oven still does not heat up.
55 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Michael J from STATEN ISLAND, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
316490003
trouble code F10 low oven temperature, oven not overheating,low resistance reading on ohm meter
Turned off electric,removed rear panel and replaced part.oven is now operating good as new.
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
George from TURNERSVILLE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
316490003
Range would start beeping and needed to be unplugged.
Remove 4 screws on back panel. Unclip wire connector and remove probe and install new probe.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Jess from DEWEY, OK
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
316490003
oven would not heat up error code F10 showing on veiw screen
move the range out and unplug power supply, removing the back cover allows access to the probe, this can be done with screw driver or nut driver, loosen clamp that holds power cord in place and move backing out of the way, be careful sheet metal can be sharp, locate the probe unplug the connector and remove screw holding probe, pull old probe out install new probe, fasten down and plug in connector. attach backing and tighten clamp on power cord, plug in to power supply, turn on oven and give it several minutes for probe to work, it took only 20 minutes to replace the bad probe and the oven works like new hop this helps
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Tracy from Summerville, SC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
316490003
My five-year-old Frigidaire Gas stove was giving an F 10 code.
I looked up the problem on YouTube and it said it was the oven temperature probe was going out. So I ordered the probe and it was shipped out, received within two days. Took out a few screws on the back of the stove installed it, put it all back together and it’s working perfect.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Lawrence from LIVINGSTON, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Parts Used:
316490003, 316489403
OVEN WOULD NOT HEAT UP OVER 100 DEGREES
I "You Tubed" disassembly and commenced by disconnecting electric power. Removed door via You Tube instruction, removed back panels of unit, and replaced the oven temp probe. Easy Peasy. Then removed bottom of oven, next level above the burner and started to remove the igniter. One nut refused to be removed so I removed the burner and cut the nut and drilled it out. I reinstalled the new igniter with a metal screw from the rear panel and reinstalled the burner. Through the tiny hatchway I reconnected the new igniter and reassembled the oven to test. Just fine heated to 350 in 7 minutes. Awesome. Then, I called my brother, Pat, to give his imprimatur to the hillbilly nut switch. He said ok, I am done.

To any reading this, I would order the igniter and the burner at the same time. That tough nut cost my one extra hour.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Timothy from Palm City, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
316490003
Range displayed error code F10
Unplugged range; removed back cover; removed old oven probe. Installed new probe; replaced cover; connected power and turned on range - that simple. My only issue was probe was shipped in bubble rap and unit was slightly damaged (bent). Once straightened, the probe could be installed. Probe should have been shipped in sturdy cardboard cylinder or box. I called customer service, they were very nice, and noted my feedback on my account in case the unit fails prematurely.
1 person found this instruction helpful.
Was this instruction helpful to you?
Deane from WINCHESTER, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
316490003
temp. probe
Easy watched on line video
1 person found this instruction helpful.
Was this instruction helpful to you?
Juliette from BRINKLEY, AR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
316490003, 316538901
Oven temperature ran very high
When the part arrived, I open the box. Cut off my breaker to the range. Pulled back the stove and unscrewed the back. Located the probe, unscrewed the one screw that held it in. I then unclamped the white connectors, remove the old probe, replaced it with the new one reclamped the connectors. Screwed it back into the range. Replaced the back and screwed that back together. It was so easy I was very proud of my self. I cut the breaker back on and cooked a can of biscuits just to see if it really worked. And it did. My bread was not burned, it was cooked to perfection.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
10 Reviews
4.4
out of 5
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
790.95063310
Range - Kenmore Range/Stove/Oven Model 790.95063310 (79095063310, 790 95063310) Parts
Kenmore
790.95063311
Range - Kenmore Range/Stove/Oven Model 790.95063311 (79095063311, 790 95063311) Parts
Kenmore
790.97203012
Range - Kenmore Range/Stove/Oven Model 790.97203012 (79097203012, 790 97203012) Parts
Kenmore
79071342700
Range
Kenmore
79071342701
Range
Kenmore
79071342702
Range
Kenmore
79071342703
Range
Kenmore
79071342704
Range
Kenmore
79071342705
Range
Kenmore
79071342706
Range
Kenmore
79071343700
Range
Kenmore
79071343701
Range
Kenmore
79071343703
Range
Kenmore
79071343704
Range
Kenmore
79071343705
Range
Kenmore
79071343706
Range
Kenmore
79071343707
Range
Kenmore
79071343708
Range
Kenmore
79071343709
Range
Kenmore
79071344700
Range
Kenmore
79071344701
Range
Kenmore
79071349700
Range
Kenmore
79071349701
Range
Kenmore
79071349702
Range
Kenmore
79071349703
Range
Kenmore
79071349704
Range
Kenmore
79071349705
Range
Kenmore
79071349706
Range
Kenmore
79071352700
Range
Kenmore
79071352701
Range