The oven burner spark module ignites an oven burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, KitchenAid, Jenn-Air, Maytag.
Part# W10860916 replaces these:
AP5999387, W10457998
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ilias
March 29, 2024
Burners have a hard time igniting. Oven works normally. Replaced the range oven burner spark module about 7 months ago. Curious if the control panel has connection with all the burners.
For model number WEG730H0DS0
Hi Ilias,
Thank you for your question. If the surface burners are not igniting, there are a couple of things that you will need to check. First check and see if the burner caps are aligned correctly. If they are not aligned correctly, you will need to re-position them. If you have recently cleaned the cooktop or if there has been excess moisture caused from either cooking or spills, remove the burner caps, and allow the burners to dry out before using them again. If there is food debris in the burners, they will need to be cleaned, so they can work properly. If you have done all this and the burners will not light, you may need to replace either the spark ignition switch or the igniter. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Darren
February 13, 2024
The bake and or broil option do not work on my Whirlpool gas range
The Ignitors do not seem to come on for either
Weird why both do not work
The selection screen seems to work fine just no action from there
Will the the spark module board solve cure my issue?
Thanks
For model number WEG745H0FS0
Hi Darren, thank you for reaching out. We have found that the issue is probably with the switch membrane, part number PS10060049. We would recommend replacing the switch membrane to fix the issue. We hope this solves your problem!
