Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Maytag, Kenmore, KitchenAid.
Part# W10858393 replaces these:
W10671241
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Danielle G - July 23, 2022
Verified Purchase
Easy repair
Great customer service. They sent me a you tube video how to install and it went like a charm. Thank-you
Diane G - January 22, 2020
Verified Purchase
Part was what I had figure except there was no metal bar in it like the original and it was’t mentionned. Neitheir foam pad
The part was in great condition and came very fast.
Craig A - September 22, 2019
Verified Purchase
Great part
New part perfect fit.
Mohandai B - October 17, 2018
Verified Purchase
Was a perfect fit!
Quick delivery, great price and perfect fit.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The shelf frame and slide rail broke
This could have been a 5 minute repair if the shelf frame had included the U shaped metal piece and the front curved snap on decorative piece. I had to break the old frame, slide out the U shaped piece, insert it into the new frame then carefully snap off the decorative curved piece and attach it to the new piece. You would think for $100 it would be the complete set. The shelf did not support the weight of the drawers without completing these two additional steps.
Other Parts Used:
-
Abby from MAYFIELD, KY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
November 25, 2019
Does shelf part w10858393 (number 15 of the shelf part diagram ) have a support in the middle at the back of the refrigerator. The original one broke in half in the back and i believe it needs a shelf chip or a support bracket
Thanks
For model number KRBR102ESS00
Hello Jeff, thank you for your question. This part has a little curve cut out of the back of the frame. The supports are two L shape parts which are Crisper Support - Left Side Part #: PS11743470, Crisper Support - Right Side Part #: PS11743471. The frame also has a center rail that splits the frame and supports the drawers as they slide into the frame. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Theresa
December 30, 2019
I have a Magtag refrigerator, and I need what holds the crispers. the t bar is broken and the frame that holds the glass its all one piece need the piece that the glass sits on. Its a whole frame on the frame in front its states the humidity controls. Theresa
For model number MFF2258FEZ
Hi Theresa,
Thank you for your question. The part number listed under your model number for the crisper shelf frame is PS11731402. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 27, 2020
Regarding part #17 (ps11731402). The back of the the shelf broke on my Maytag, and when i took it out it seems there should be a bracket in the middle to support the center. I have the left and right brackets but can’t find a middle bracket. I also don’t see one on the exploded diagram.
For model number MFI2269DRM00
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Center Crisper Drawer Slide Rail - White - Part# PS11757048.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
April 10, 2023
Hello, I am looking for the pieces that the crisper drawers hang from. On my model the shelf is all one unit and the middle bar broke. My model doesn’t have the spot to just replace the center section. The shelf also has the glass sit on it. Just want to double check I have the right info.
For model number MFF2258DEE00
Hi Stephanie,
Thank you for your question. The part number for the crisper drawer shelf frame is PS11731402. The center crisper support, part number PS11757048, is sold separately. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Theresa
December 30, 2019
I need what holds the glass and the what the drawer slides into like a t broken at the tneed the unit that will hold the glass and the drawers, what do i need for my Maytag.
For model number MFF2258fez
Hello Theresa and thank you for writing.
We certainly can help you with this, we would need to know if it is the frame for the crisper or for the deli pan?
Looking forward to find you the correct parts. Always reply including your model number. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731402
Manufacturer Part Number: W10858393
Manufacturer Part Number: W10858393
Brand
Model Number
Description