Part Videos
Replacing your Whirlpool Dishwasher Lower Spray Arm
Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool.
Part# W10837249 replaces these:
AP5988717, W10629546, W10838302
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Adriano S - September 7, 2024
Verified Purchase
Fixed leak around door
Part arrived as promised and in excellent condition. The leak from the bottom of the dishwasher door is fixed.
Mitchell K - August 11, 2024
Verified Purchase
Easy repair, very quick, no more water leak
I had water leaking out the bottom of the dishwasher door so I ordered a lower spray arm. The part came quickly and was in good condition. The repair took less than 30 seconds. Problem solved!
Adam M - June 12, 2024
Verified Purchase
Easy to install and worked
After reviewing the website to see others have the same issue I follower their lead, order new spray arm and once installed fixed the leaking door issue.
TIM E - April 25, 2024
Verified Purchase
Super Easy!
Super easy! Put in my model# and selected the part. 3 days later it arrived and installed it minutes later. Works perfectly! Thanks!
Vincent S - January 2, 2024
Verified Purchase
Fixed my issue
Fixed issue of water leaking from under door. Broken sprayer arm shooting water at door instead of upwards causing waves. Had replaced door seal first but wasn't issue.
Guilherme R - December 31, 2023
Verified Purchase
Very easy to replace and solved a leak problem
My machine was leaking in the front in one side of the port, and it was not cleaning well. I figure out my arm was a broken and not working properly, it was opening in the side because of the pressure of the water. So I just replace it for a new one and it solved both issues. It started washing well again the dish and it was not leaking anymore. You can check if your arm is the issue by putting a camera inside the dishwash to record the process. You'll see if it's turning properly and if the water is throwing only from the roels in the arm, not in the side.
Martin M - November 16, 2023
Verified Purchase
Door was leaking
Changed the spray arm , Problem solved
Dimas C - September 25, 2023
Verified Purchase
Good stuff!
Part
arrived in a few days, works perfect,
2 minute swap out.
Florett E - August 3, 2023
Verified Purchase
Great Part
Was very please with my purchase. Works great and easy to repair. Thank you
Jerome P - April 26, 2023
Verified Purchase
Easy repair, fast shipping, everything was excellent
My dishwasher began to leak on both sides of the door. The Lower Spray arm was cracked, and the water splashed in my door instead of going up. Took 2 minutes to replace. Service A+++, very fast shipping.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water coming out both sides of the bottom of the door.
Replaced Arm spray...
Turn it left and it comes off......place new spray in .. turn it right...and it's in...make sure it moves freely.......Arm wasn't turning and water was consistently hitting the front door.....I also replaced the door seal...
Turn it left and it comes off......place new spray in .. turn it right...and it's in...make sure it moves freely.......Arm wasn't turning and water was consistently hitting the front door.....I also replaced the door seal...
Other Parts Used:
-
Michael from HAMILTON, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Poor to no cleaning lower basket
lower wash arm cracked by spinning into items hanging out of bottom of basket. part twists and snaps right in. glue did not fix.
Other Parts Used:
-
jeffrey from HOUSTON, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm had a small seam split forcing waves of water against the lower door causing water to leak out the door bottom.
After replacing the door seal and the dishwasher still leaked a lot of water out the bottom of the door, I read posts by a couple of other DIY who said the lower spray arm can split at the seam and cause this. One post noted it is very difficult to determine if this is the problem, that you may have to take the blade of a screwdriver and try to pry the seam apart gently to see if a gap does appear with very little force being applied. If so, then just imagine what happens when that very hot water makes that plastic more flexible and then the seam opens and forces waves of water against the lower door. I could see a small seam split using that strategy and when I replaced the spray arm, my leak stopped. I don't regret replacing the door seal as it had a couple of small tears and hard water deposits all over it, so it was time to do that even though it was not the culprit for the extensive leak. The arm is SO EASY to replace, just twist the plastic nut under it and it pops right off. Put the new one on and twist the nut the other way and it secures it.
Other Parts Used:
-
Cameron from DEFIANCE, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peggy
May 1, 2023
I need lower spray arm. White plastic piece in middle is not holding. Does arm come with this piece or is it separate? Thanks
For model number WDT970SAHZ0
Hello Peggy, thank you for your question. On the backside of the arm is the male connector( white round plastic) that allow it to fit on the Pump and Motor Assembly below it. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peggy
May 8, 2023
I ordered and received this lower spray arm and thought the white male part was included. I think that is what I need as it comes out easily and will not hold the spray arm in place. Please advise. Thanks
For model number WDT970SAHZ0
Hello Peggy, thank you for the question. According to our research, you may need to buy the upper wash arm support, part number PS16660558, to fix the issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Allen
September 30, 2021
How does one know if the lower arm is cracked and if it is will that make the door leak water?
For model number WDTA50SAHW0
Hello Allen, Thank you for the question. If the Spray Arm is cracked you will be able to visually see the crack. We are not sure this would cause a leak however. We suggest checking the Lower Door Seal for wear or damage. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Sara
November 11, 2021
can i take apart the lower spray arm? if so how do i do that? there is something stuck in there and it is not cleaning properly. Thank you
For model number WDTA50SAHW0
Hi Sara,
Thank you for your question. There is no way to take the lower spray arm apart. If the lower spray arm is clogged, try soaking it in a solution of warm water and vinegar and use a fine pin to remove any blockages from the spray holes. If this does not help, you will need to replace the lower spray arm. If you need to place an order for the lower spray arm, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Pam
May 13, 2022
Our dishwasher is now making a thumping noise. It thumps whether it’s run empty or full. Could it be it needs a new part, a new arm?
Thanks
For model number WDTA50SAHB0
Hello Pam, Thank you for your inquiry. This issue can be caused by one of the spray arms hitting something as the dishwasher is washing. Check the middle and lower spray arms for any obstructions or loose connections. We also recommend checking the door springs, the door balance kit, and the pump and motor assembly. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
David
April 21, 2023
Dishwasher is leaking from the bottom of the door. Have replaced the lower door seal and the inlet control valve. Set the front to back level so that it is slightly inclined to the rear. Reduced the amount of the water leaking but did not eliminate it. Next will replace the lower wash arm. If the leak still persists do you have any ideas or is it time to call a repair technician? Thanks.
For model number WDTA50SAHV0
Hi David, thank you for the question. If you find the dishwasher leaking from the bottom of the door, a clogged drain is usually the reason. Located at the base of the dishwasher, food particles, soap residue, and other debris can cause clogs that prevent water from draining. A clogged drain can lead to puddling inside the dishwasher that eventually leaks out the bottom of the door. If that is not causing the issue and the lower spray arm does not solve the problem, then you may need to check the overflow control switch, part number PS11750031. If it is faulty, you may need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11727921
Manufacturer Part Number: W10837249
Manufacturer Part Number: W10837249
Brand
Model Number
Description