Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Front right burner would not light.
After calling a appliance repair person out because I could not find the module, he pulled the range out so he could remove the top, back cover. He used the correct nut-driver to remove the back. The module is attached to the cover and is exposed when you take it off. Just gently pry the module from the cover. When I saw where it was I paid the repair person for his visit and ordered the new module from PartSelect.com. When it arrived I proceeded to install the new module. I had to use pliers to grasp each connector going into the module and use a flat bladed screwdriver between the module and pliers to get each one to release. I took one wire off at a time and inserted each one into the new module, corresponding to the place it came out of the old module. When I had all the wires inserted into the new module I pushed the new module, using a flat bladed screwdriver, back onto the back cover of the stove. Reattached the back cover with the metal screws and pushed the range back into place. All burners are lighting as designed.
Other Parts Used:
Timothy F from LENNON, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
January 16, 2019
Jgb750sef3ss
I replaced the wiring harness wb18x26050 about two years ago. All burners lit correctly for about 18 months. At least one no longer lights with using a match. I was planning to replace it again. Should i consider any other parts?
For model number JGB750SEF3SS
Hello Scott, thank you for your question. Yes, I would recommend replacing the WB18X26050 again. The electrodes are not sold individually so the set would have to be ordered. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leonard
October 30, 2019
The front left burner when turned off makes the igniter constantly click. Whats the problem?
For model number JGB660SEJ4SS
Hello Leonard, thank you for writing. It is possible that this is due to a faulty Ignition Module, this part number PS11725181 for your range. You may also want to consider the Burner Valve, part number PS8754416. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
August 22, 2023
No spark on a couple of frequently used burners. The others spark fine. Replaced electrode harness, but didn't completely fix problem. Should I try the Ignition Module? Can the ignition module fail for individual burners, or, when it fails, do all burners not spark? Thank you!
For model number JGB660EEJ1ES
Hello Mike, thank you for reaching out. Usually, if the igniter module is bad then none of the igniters will spark or all will spark only weakly. The issue seems to be with the spark electrodes and harness and you may need to replace it, the part number is PS11762469. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Leonard
October 29, 2019
Igniter on when control knobs are off
For model number JGB660SEJ4SS
Hello Leonard, Thank you for the question. If the oven continues to heat after it is turned off, the control board is likely defective. PartSelect Number PS12296260. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11725181
Manufacturer Part Number: WB13X24741