Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers.
Shock absorber absorbs the vibrations and movements of the outer washer tub.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Clare C - August 22, 2018
Verified Purchase
Easy repair
The part was the exact fit nd solved the vibrating issue
★★★★★
★★★★★
Mike S - August 26, 2018
Verified Purchase
Worked great
The parts were just as advertised and worked great
★★★★★
★★★★★
David H - September 8, 2022
Verified Purchase
Reasonably easy repair after reviewing a few YouTube "how to" tutorials.
The part looks just like the original. Problem was that the machine would get out of balance error codes even with a light load. Bought springs as well. Springs helped more than the shocks to fix the problem.
★★★★★
★★★★★
Jose C - March 20, 2023
Verified Purchase
Great parts
The delivery get on time, easy installation and fit perfect in my machine
★★★★★
★★★★★
Clancy P - April 27, 2023
Verified Purchase
Just what the doctor ordered
Order came extremely fast. Took a little time to install as I installed all from the front of the machine. Old ones were leaking. Machine is running smooth again.
★★★★★
★★★★★
Doug M - November 27, 2018
Verified Purchase
Easy repair.
The shock absorber was just what I needed. The washer doesn’t rattle now.
★★★★★
★★★★★
Lorrie F - August 20, 2018
Verified Purchase
Easy repair!
The part was absolutely perfect! My washing machine is still not completely fixed but my husband was very pleased with the parts and how fast we received the parts!
★★★★★
★★★★★
Michael C - November 11, 2022
Verified Purchase
Noisy washing machine
The shocks arrived quickly and did the trick! Quality parts!
★★★★★
★★★★★
ERIC R - June 20, 2022
Verified Purchase
Easy repair, problem solved
The part was in great condition and came fast. My applliance is back in working order.
★★★★★
★★★★★
Bruce F - September 28, 2019
Verified Purchase
This was correct part. Easy to install.
The shocks arrived in three days (over the weekend). Great service, easy to track on Purolator system.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
shocks showing their age
Overall, the install was easy. Just a matter of getting yourself to get it done. The video on the removal / install procedures was most helpful. The front shocks were completed very quickly. The rear shock required all hoses to be disconnected and the back of the washer to be removed. After removing perhaps a dozen screws the cover was still fastened. You will see (in my case) 4 plastic flat clips. after they were removed the back came off. The rest of the project was the same as the front shocks. 1st time thru so to be expected. Anyway, certainly a project that any DIYer can tackle. Thanks Partselect for the correct parts in a timely fashion and the knowledge to perform the install. Scott
Other Parts Used:
SCOTT from COLCHESTER, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum was out of balance
Easy fix, I remove the front lower panel and the shocks where right in front of you , with a little twist with an adjustable wrench the cam right off . I removed and the replaced and it the same when you remove the back panel. P.S when installing the shocks start by connecting to the bottom and then connect to the drum it will make it lot easier. Good luck on your repair
Other Parts Used:
wilfredo vega from STRATFORD, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring balanced tub violent shake on spin
Washer was on a 13 inch high platform I built for front.load Heat washer and dryer. Removed 3.screws from bottom of front panel and had access to all 4 shocks..front and rear. All shocks were unattachedeither at base or on tub. Easy to install all 3 from front without moving Mach. I figured if 1 or 2 shocks failed the violent.movement broke the other 2. Purrs like.a.kitten now. No bearing.or spring.damage.
Other Parts Used:
Paul from TARPON SPGS, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer shook and made noise during spin cycle.
Shocks are the #1 recommendation for this problem, but they were not the solution. The problem turned out to be broken weld in the stainless tub. Three of the shocks can be replaced from the front, the one under the motor can only be accessed from the back of the machine, which means it has to be pulled out away from the wall. Taking the old ones out is kind of a pain, they don't twist off easily and there is little room to use tool. Putting the new ones in is easy, they just twist into place.
Other Parts Used:
Homer from Windham, NH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 13, 2017
How many shocks does this unit have and is it advisable to change all four shocks even if only one is bad?
For model number MFW9700SB0
Hi David, Thank you for the question, yes we suggest replacing all the shocks as one bad one can pout extra wear on the others.There are 4 shocks required for this appliance. Hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
April
November 1, 2017
How can you tell which or if all shock absorbers are bad? My washer shakes very bad with every load no matter if small or large loads.
For model number WFW9151YW00
Hi April,
Thank you for your question. There is a sure fire way to tell if the absorbers are bad. When you remove the part, if you are able to very easily (with little effort) pull part the two pieces that make up your shock absorber apart. I hope that helps. Good luck with your repair.
15 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 9, 2017
I need to replace a shock absorbor. Top bracket is broken. How do i release the bottom bracket? Dave
Hello David, thank you for contacting us. We have a how to video that shows how to remove and install the shock absorbers. You can follow the link below, hope this helps!
http://www.partselect.com/PS11723173-Whirlpool-W10822553-Shock-Absorber.htm#RepairVideo
4 people found this helpful.
Was this helpful?
Thank you for voting!
Brenda
March 23, 2018
How many shocks does this unit have?
For model number MFW9700SQ1
Hi Brenda, Thank you for the question. There are normally 4 shocks, two in the back and two in the front. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Graham
December 10, 2019
I recently asked the question. How many shocks does this machine require.? ( it had only three installed from factory. ) the answer i received: this machine requires four shocks. new question: are you sure about that.? parts list for this model says (3) shocks. can you please confirm. thank you.
For model number MHWE200XW00
Hello Graham, thank you for your question. Most washers have 4, but if your unit was only equipped with 3 then there would only be 3 on your unit that would be replaced. This part is used on multiple models and some take 3 and some take 4. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ned
March 23, 2023
Machine has 3 shocks vibrates shakes a lot need to replace 1of the shocks it’s got openings for 5 don’t know how many shocks there should be on this model
For model number YMHWE251YL00
Hello Ned, thank you for your query. According to our research, there are three shocks in your washer. We would recommend checking the following parts to fix the shaking issue: shock absorber, part number PS11723173, spring, part number PS993023, and leveling legs, part number PS11738005. We hope this helps, good luck with this repair!
How many shocks are attached to the tub of the washer? Since it probably best to replace all at the same time i want to be sure i am purchasing the correct amount. Thanks.
For model number wfw9151yw00
Hi Cindy, thank you for your question. Most washers have at least three. You may want to take a look inside of your appliance just to double check whether or not you have three or four shock absorbers. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Merrill
November 10, 2019
I have taken the shock absorbers out of my front load washer. The machine shakes and vibrates violently. How can i tell if the shock absorbers are faulty?
For model number 592-49182
Hello Merrill, thank you for your question. There is a sure fire way to tell if the absorbers are bad. When you remove the part, if you are able to very easily (with little effort) pull part the two pieces that make up your shock absorber apart. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Graham
December 7, 2019
How many shock absorbers does this machine require. There were only three installed from the factory but there are spots for at least five shocks. Machine rattles, shakes, and moves when in rinse or spin cycle. Thanks
For model number MHWE200XW00
Hello Graham and thanks for writing.
There are 4 shocks required for this model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Fabian
February 12, 2020
Buenas tardes cuantos amortiguadores (shock absorber) requiere este modelo.???
gracias
For model number wfw9550wr00
Hello and thank you for writing.
There are four shock absorbers required for this unit. We hope this helps. Please contact us anytime if you require further assistance.
Hola y gracias por escribir.
Se requieren cuatro amortiguadores para esta unidad. Esperamos que esto ayude. Póngase en contacto con nosotros en cualquier momento si necesita más ayuda.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11723173
Manufacturer Part Number: W10822553
