Right Hand Track

Hi Glenn, Thank you for your question. When you face the dishwasher, the orientation is based on your left or right side. I hope this helps. Thank you and have a great day!

Hello Mario, Thank you for the question. To install the Tracks for the Lower Rack, unplug the dishwasher and turn off the water supply. Lift up the locking tabs to remove the rack after pulling it out. Use a screwdriver to remove the mounting screws securing the access panels and remove the inner and outer panel with insulation. Use channel-lock pliers to unthread the water supply line elbow fitting from the inlet valve, and watch for any spare water. Use a nutdriver to unthread the screw to release the terminal box from the right support rail. Detach the cover and note the orientation of the wires, then untwist the wire nuts to disconnect the wires. Unthread the screw to release the grounding wire, and then the strain relief nut. Detach it and the wires. Disconnect the drain hose and feed it through the cabinet. Open the dishwasher door and remove the mounting bracket screws. You may need to adjust the legs to lower the appliance. Pull the dishwasher away from the cabinet carefully, as it is heavy. Use a 5-1/16" socket or nutdriver to unthread the screws securing the rack track. Remove the old track and install the new track. Reverse this process to put your dishwasher back into place. We hope this helps!