See part 2 in the diagram
( Grid squares measure 1x1 inch )
Dishwasher Lower Dishrack Wheel Assembly - Gray
$53.98
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11722152
Manufacturer Part Number W10195416V
Manufactured by
Whirlpool
Product Description
Dishwasher Lower Dishrack Wheel Assembly - Gray Specifications
This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# W10195416V replaces these:
AP5983730, W10195416, W10195416VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marcel
July 20, 2017
Both wheel assemblies on both sides of my lower dishrack are flimsy and not staying put. They’re basically falling off and I think they’re missing the pin thing. Do I need to order this whole assembly? And if this is happening on both sides do I need to order two of them?
Hi Marcel, to fix your lower dishrack and keep it from falling off you will have to order this assembly, as it is not sold separately. If you are replacing both sides you will need to order two of W10195416V. Please let us know if you have any further questions.
92 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha Johnson
February 1, 2018
I only need the wheels for this model is it possible to just order the wheels only??
For model number 66513299K111
Hi Marsha,
Thank you for your question. The wheels for the lower dishrack assembly listed under your model number are sold in an assembly where each assembly has 2 wheels. The wheels are not sold separately. I hope this helps. Thank you and have a great day!
61 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
March 9, 2018
The plastic pin that holds the wheel in place on the lower dish rack keeps popping out of the wheel, so it comes off. I'm hesitant to replace it with something that looks just as flimsy. Is it possible that a new wheel assembly would have wheel pins that lock in place more securely?
For model number KUDS35FXSS3
Hello Susan, thank you for your question. The wheel assembly part number W10195416V is the OEM replacement part for your unit. I don't believe they've made any changes to the part, however, we offer a 1 year warranty on all of our parts. If the part breaks within a year, we will replace it for you! I hope this information helps!
46 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 5, 2017
Does this kit on line have 4 units with wheels or just 1 unit .
For model number W10195416V
Hi David,
Thank you for the question. They are sold individually, so you will receive one bracket/mount with 2 wheels attached.
Hope this helps!
42 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
January 8, 2018
I need the wheels themselves not the whole lower dishrack wheel assembly, the racks are fine but the wheels, and the small post that connects it to the wheel assembly. These wheels keep coming off and breaking eventually. Can i get some of the wheels and posts only?
For model number KUDE60FXSS3
Hi Craig,
Thank you for your question. The wheels for the lower dishrack can be purchased separately. The part
number for the lower dishrack wheel assembly is PS11722152. I hope this helps. Thank you and have a great day!
25 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
March 7, 2019
I need to replace the wheels on the bottom rack, both sides. What part should i order?
For model number KUDE48FXWH
Hello Ken, thank you for your question. The bottom rack wheels are Part Number: PS11722152. You would want to order 4 of these parts. I hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 2, 2018
So, please clarify this for me. I will receive one plastic wheel replacement for $20? A pair for $40? And $80 to replace all 4 on the bottom rack? How long will these last with normal wear and tear?
For model number kudc10fxss5
Hi John,
Thank you for your question. Yes, those would be the costs to replace the parts. The parts should last along time if they are used as they are supposed to. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Cherie
July 20, 2017
Im having trouble removing the old wheel assembly, tips?
Hello Cherie, looking at the lower dishrack wheel assembly W10195416V, release the clips and twist outwards to lift the assembly off. You can then simply snap the new one in its place. Best of luck with this repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Kayla
July 20, 2017
If I’m having trouble rolling my lower dishrack this is what I need correct? Is this the whole assembly… I know it says assembly in the name but is this all I need?
Hi Kayla, this wheel assembly W10195416V is all you will need to fix your lower dishrack. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Robin
March 6, 2018
I need to replace one wheel assembly on my dishwasher so my husband thought we should replace all 4 since one is broken. Mine appears to have a different wheel assembly on the back, and the one shown is located on the front sides of the dishwasher. Do you sell the different one for the back?
For model number KUDS30SXSS0
Hi Robin, Thank you for the question. Checking the model number, it shows the front and rear wheels are the same, Part Number: PS11722152. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your KitchenAid Dishwasher Dishwasher Lower Dishrack Wheel Assembly - Gray
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 26 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken wheel unit on the bottom dish rack
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix.
-
Thomas from WEST OLIVE, MI -
Difficulty Level:Very Easy -
Total Repair Time:Less than 15 mins -
Parts Used:W10195416V
71 of 80 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel on lower shelf broke off
Simply snap the old one off and snap the new one on. Simple as that less than 15 seconds.
-
Dennis from OAKWOOD, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:W10195416V
25 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All of the wheels had broken off and the bottom rack was hard to move.
It was very easy to pry off the old wheel assemblies with a screwdriver and pop the new ones in place. Although the part is called "wheel" it is actually the plastic piece containing two wheels. I thought it was a little confusing to just call it "wheel" as each piece has two wheels. It was an easy repair.
-
Cheryl from VANCOUVER, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers -
Parts Used:W10195416V
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two wheels sets were Broken
Removed bad wheel sets using screw driver to help pry broken part loose. Then just snapped in replacement. Took less than 5 mins. Now it works great.
-
KEITHCOLONA from ROANOKE, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:W10195416V
10 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel fell off
followed video instruction
-
Richard from BOSTON, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:W10195416V
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel assembly broken
Very easy to repair with the replacement wheel assembly. Popped out the broken one, popped in the new one. Price was nothing compared to having an professional repair person come to the home. Glad I found you on line!
-
Daryle from WEYMOUTH, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:W10195416V
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom rack wheels needed to be replaced
all 4 wheel units needed to be replaced, popped them off and installed need wheel units in roughly 10 minutes, no tools needed.
-
Raymond from BELLINGHAM, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:W10195416V
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel assembly broke
I opened the package took out the replacement part and installed it with no tools. Easy, done in 10 minutes.
-
Royce from MODESTO, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Parts Used:W10195416V
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced lower rack wheel assembly
watched video took less than 5 min to replace veeeery easy to do
-
philip from racine, WI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:W10195416V
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rollers broke on right side of upper rack adjustment.
I followed the instructions on your recommended video; so easy! Thank you!
-
Geneva from OWENS X RDS, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
-
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Alexandra D - 4 days ago
Easy Installation
The part was extremely easy to install, rolled smoothly fit perfectly. Delivery was quick!
Carolyn P - 4 days ago
Dishwasher part
Part was exactly as described. Easy to install
Frank Z - 10 days ago
Perfect part, easy install
Worked as expected. A little overpriced.
James G - 11 days ago
Easy repair
The 2 parts were in good condition and easy to install watching the video. The annoying thing about the replacement why did they wear out in the first place? Are they cheaply constructed?
Felicia B - 17 days ago
Part worked great!
Thank you for the cross reference info to make sure I was ordering the correct part for our dishwasher. Replaced the faulty part in a snap!
Gary L - August 15, 2021
Lower Dishwasher wheels
Easy repair, just snaps in
Robert L - August 15, 2021
Perfect for Repair but Pricey
I ordered 2 of these as the wheels with central push plugs kept popping off the original rack when rolling it in and out of the washer. They were super easy to install but the $125 for the two of them was more than I wanted to pay, as I would imagine this simple part is dollars to make at most. I get the advantage when selling replacement parts, as a homeowner doesn't want to go through the hassle of a full unit replacement, but this markup seemed a bit extreme casting a negative vibe on the experience. The agent I dealt with on the phone was awesome though and delivery was really fast.
Tim F - July 31, 2021
Snaps in place!
Purchased for a Maytag dishwasher. It was exactly the same as the other original parts. Super easy, barely an inconvenience to install. Prompt delivery from PartSelect, very impressed!
Fred T - July 28, 2021
Perfect fit, easily done
The part was perfect and took moments to install.
Claude R D - July 22, 2021
Dishwasher parts.
Initially delayed by COVID but when notified of delivery very efficient and quickly received. The parts were in good condition and as per infections easily installed. Thank you.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11722152
Manufacturer Part Number: W10195416V
Manufacturer Part Number: W10195416V
Brand
Model Number
Description
Kenmore
66513253K110
Dishwasher
- Kenmore Dishwasher Model 665.13253K110 (66513253K110, 665 13253K110) Parts