The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH12X10295 replaces these:
AP3873828, 1168688, WH12X10295
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer stopped at spin cycle.
I thought timer was bad. Spin motor needed resetting. Video on youtube. I'm keeping new timer. Nylon gear on old timer dial is worn. Machine is about 15 years old. It's all metal. Probably made in USA.
Other Parts Used:
Fern from POLAND, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
October 16, 2017
The knob on my washer rotates fine through all cycles and will turn the unit on/off.The washer gets stuck in certain phases of the wash cycles and won't advance.Would the knob cause this or probably need to replace the timer?
For model number WCSR2090DBWW
Hi Chris, Thank you for the question. This issues would be caused by the timer. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Andre
September 27, 2017
Off -on- set push pull dial. I think the part # is wh12x10295 if this is the part, the plastic portion in the center with the gears,the teeth are broken and worn,can just that piece be replaced or do I have to purchase the whole part. I can still operate the machine so I didn't want to remove the panel. If this is the right part please let me know. Many thanks
For model number WDSR2080DAWW
Hi Andre, Thank you for the question. If the timer switch is fine and you just need the dial with the gears/teeth you just need the Knob and Clip, PartSelect Number PS268451. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marvin
January 11, 2018
Sometimes the drum will not spin during the rinse cycle.Typically when we wash jeans but not every time, last time it was just 3 jeans.Most of the other times it works fine.What could be the cause of this issue? The belt is in good shape; could it be something with the timer?
For model number WDSR2080DBWW
Hi Marvin, Thank you for the question. I suggest checking the Agitator Coupling Kit,PartSelect Number PS1517844. If this coupling is wore down it will not grip on heavy loads such as jeans. Hope this helps!
You recently just answered a question about my drum not spinning. A few weeks ago I changed the agitator coupling kit because of agitator not working. Then noticed the drum-spinning issue. Could it be a problem with the the new part.
For model number WDSR2080DBWW
Hi Marvin, Thank you for the question. If there was an issue with the new part you will be able to see physical damage to the part. You can check inside the bottom of the agitator. The old defective coupling may have wore out or damaged the agitator, Part Number: PS1482518. Hope this helps!
Was this helpful?
Thank you for voting!
Laura
May 5, 2018
It will stop and stay on a cycle, and i have to manually turn to the next cycle. If i don’t it will get stuck in the same cycle until i remember to switch it! What part do i need!?
For model number WDSR2080DBWW
Hello Laura, thank you for your question. If the timer is not advancing on its own, but will advance if you manually turn it to the next cycle you will want to replace the timer itself, Timer Part Number: WH12X10295. Good luck with your repair!
Was this helpful?
Thank you for voting!
Josgenni
August 19, 2019
Hello I can't find the timer of my washer, there is anything that can be adapted?
For model number WCSR2090DAWW
Hello Josgenni, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1015955. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1015955
Manufacturer Part Number: WH12X10295
