GE WR60X23584 - Evaporator Fan Motor - 115V 60Hz | PartSelect.ca
Evaporator Fan Motor - 115V 60Hz – Part Number: WR60X23584
Evaporator Fan Motor - 115V 60Hz – Part Number: WR60X23584 Evaporator Fan Motor - 115V 60Hz – Part Number: WR60X23584 https://partselectca.azureedge.net/Schematics/GE/00116398i02.gif

Evaporator Fan Motor - 115V 60Hz

7 Reviews

Your Price

CAD$119.83

PartSelect Number PS10063450
Manufacturer Part Number WR60X23584
Manufactured by GE

This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

This part works with the following brands: General Electric, Hotpoint.

This part works with the following products: Refrigerator.

This part fixes the following symptoms: Noisy | Fridge too warm | Freezer section too warm | Will Not Start

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
(1)
PartSelect: PS284555
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately ...
$6.90
Special Order
(1)
PartSelect: PS284555
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately ...
$6.90
Special Order
Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.0 / 5.0, 36 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Luis from College Station, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WR60X23584
Freezer Fan
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
210 of 219 people found this instruction helpful.
Was this instrustion helpful to you?
alex from rohnert park, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
WR60X10204, WR60X23584, WR02X12008
evaporator fan making lots of noise
the repair was really easy!!! took longer to put the little clip on the fan part than it was to install the whole moter and put everthing back together

save money do it yourself.....
93 of 105 people found this instruction helpful.
Was this instrustion helpful to you?
Arthur from East Meadow, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WR60X23584
Loud Fan Motor
Unplug refrigerator.Remove the floor of the freezer box by removing the 4 philips head screws. Remove the cover over the fan by pulling it straight up and out. Remove the styrafoam duct by pulling it straight up and out. Remove the back wall of the freezer by removing the 4 philips head screws. Unplug fan. Remove the fan, bracket and all, by removing the two philips head screws on the back wall. Take the two halves of the bracket appart by removing the two hex head scews on the back of the bracket. Remove the "O" ring from the fan blade and remove the blade. There is a rubber grommet on both the front and back halves of the bracket. Make sure they are set properly in the brackets to secure and position the motor properly so the fan blade doesn't hit anything when it spins. Install the new motor onto the bracket the same way you took the old one off. Check the positions of the brackets, rubber grommets and motor to make sure they're properly installed and secure. Replace the "O" ring onto the fan blade and install it onto the new motor with a firm push on the center of the blade. Install the brackets and fan onto the back wall and plug in the new motor. Reinstall the back wall of the freezer box and make sure the motor is secure. Plug the refrigerator back in and check to make sure the fan blade doesn't hit anything while it's turning. Finish reassembling the freezer box.
32 of 32 people found this instruction helpful.
Was this instrustion helpful to you?
Mark from ROCHESTER, NY
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
WR60X23584, WR02X12008
Freezer making loud humming noise.
Followed instructions per video and took roughly 45mins. Super easy and saved you time from having to hire someone and money. Highly recommend do it yourself.
27 of 30 people found this instruction helpful.
Was this instrustion helpful to you?
Richard from Port st Lucie, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WR60X10204, WR60X23584, WR02X12008
noise fan
Took off the back panel 4 screws, 2 screws on fan motar ,unpluged fan and replaced fan motor ,Hardest part of the whole job was setting the fan blade ,easy to push on but becarefull not to push it on to far.check distance on old fan before you take the blade off.
24 of 26 people found this instruction helpful.
Was this instrustion helpful to you?
Lucinda from Yucca, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WR60X23584
The lower half of the refrigerator was not cold, the fan was not blowing
First I removed the 4 screws in the back of the freezer. I then pulled the connection from the fan , I replaced the fan to the connection, replaced the 4 screws and I was done! I still can't believe how simple it was.
21 of 25 people found this instruction helpful.
Was this instrustion helpful to you?
William from GENEVA, OH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WR60X23584, WR02X12008
Loud freezer fan motor
Removed old worn out freezer fan motor and replaced with a new one. Piece of cake. Sooo easy and saved money too!
15 of 15 people found this instruction helpful.
Was this instrustion helpful to you?
bernard from Katonah, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WR60X23584, WR02X11791
Lower part of refrigerator warm
Pulled refrigerator plug from socket.
Removed all freezer items. Put them into sink to keep cool.
Phillips head screwdriver removed screws from plastic housing fan cover from rear of freezer compartment.
Removed fan housing panel by lifting up and out. Panel has two small tabs that fit into back panel.
Removed back panel with phillips head screwdriver.
Fan is now exposed. Not working.
Plugged power cord back in.
Disconnected power adapter to fan.
Voltage meter sees power to ground and hot wire.
Fan not working
Unplugged power cord.
Removed fan from rear by socket tool.
Used hair dryer to remove ice build up in styrofoam insert between freezer compartment and lower section.
Removed foam insert....broke a couple of pieces off.
Test new motor with a line cord wire stripped at ends
Motor works. (Old one did not work with same test)
Replaced fan into bracket.
Replaced bracket into rear of freezer.
Plugged power cord in.
Fan does not work.....Whoa!!!..closed freezer door and heard fan running!!! It works.
Replaced everything...foam insert, panels, food.
One week later, still working.....
(Now...I don't know why the fan did not start right away...it may be that there's a small round thermostat sitting on a copper tubing, that needed some time to kick in...but that's a supposition.)
Have fun
12 of 15 people found this instruction helpful.
Was this instrustion helpful to you?
Richard from Wellsboro, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WR60X23584
we had a power surge that killed the fan motor
I removed the fan housing , this was the hardest part , this took loosining two screws and snapping the housing loose , and there it was , settin there Idle and the coils were all ice , I let the coils thaw while I unscrewed the fan mount from the back wall of the freezer , then pulled the fan and mount out far enough to snap the wire connector loose, then I removed the two screws that hold the motor to the mount , the new fan motor comes without the blade so the blade is removed by pulling fairly had on the center off the shaft , the old motor is taken out of the mount , the new one replaces it perfectly , then the screws are replaced and tightenen , then the blade is pushed back on the shaft , the motor and mount are placed back on the back wall of the freezer department and screwed in place , the wires connected , then the housing is snapped back in place and the screws tightened , turn the dial to cool or number 2 or 3 and " bingo " it,s just like new , I can thank part select for speedy service and delivery
11 of 11 people found this instruction helpful.
Was this instrustion helpful to you?
connie from omaha, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WR60X23584
Fan Motor stopped working
Not only was finding the part rediculously easy for a person who has never done this type of thing...the repair was a sinch!! I will always return to this company for help with home equipment repairs. I saved so much money doing it this way. :) thanks guys!
9 of 10 people found this instruction helpful.
Was this instrustion helpful to you?
Customer Reviews
Average Rating:
7 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
General Electric
36411XBRERWW
Refrigerator
General Electric
36411XBRFRWW
Refrigerator
General Electric
37511KBSARWW
Refrigerator
General Electric
37511KBSERWW
Refrigerator
General Electric
38341FBMERWW
General Electric
38341FBMFRWW
Refrigerator
General Electric
38351HBMERWW
General Electric
38351HBMFRWW
Refrigerator
General Electric
38351HBRERWW
General Electric
38351HBRFRWW
General Electric
38451HBRERWW
Refrigerator
General Electric
38451HBRFRWW
Refrigerator
General Electric
A3315ABRERWW
Refrigerator
General Electric
A3315ABRFRWW
Refrigerator
General Electric
A3315ABRW
Refrigerator - GE Refrigerator Model A3315ABRW Parts
General Electric
A3316ABSARBB
Refrigerator
General Electric
A3316ABSARWW
Refrigerator
General Electric
A3316ABSB
Refrigerator - GE Refrigerator Model A3316ABSB Parts
General Electric
A3316ABSBRBB
Refrigerator
General Electric
A3316ABSBRWW
Refrigerator
General Electric
A3316ABSERBB
Refrigerator
General Electric
A3316ABSERWW
Refrigerator
General Electric
A3316ABSW
Refrigerator - GE Refrigerator Model A3316ABSW Parts
General Electric
A3317ABRERWW
Refrigerator