Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
March 30, 2023
How do I gain access to the filter located on the drain pump?
For model number WFW70HEBW2
Hello Ashley, thank you for contacting us. You will need to remove the back plate of the washer. The drain pump is located under the washer. At the drain pump, there is a knob you can open by rotating it and removing the drain filter. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 24, 2024
How do I gain access to the pump filter / remove front panel ??
If so how do you remove it.
Thank You,
Jim
For model number WFW75HEFW0
Hi Jim,
Thank you for your question. To access the filter, open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the pump filter. Remove the drawer by releasing the tab on each side. With your finger, push down on the tab on the right side of drawer, and up on the tab on the left side of drawer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Lay a cotton cloth beneath the drain pump filter to absorb any water still in it. Then remove the drain pump filter by turning it counterclockwise. Remove large clumps of lint by hand from the filter and place lint in a suitable waste container. Remove remaining residue from the filter by rinsing with water. Reinsert the drain pump filter by turning it clockwise. Make sure to turn it in as far as it will go, with the filter handle remaining as close as possible to the vertical position. We hope this helps!
Was this helpful?
Thank you for voting!
C.
September 1, 2022
How to check the filter on my washer?
For model number MHW5500FW1
Hi, thank you for your inquiry. Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the pump filter. Remove the drawer by releasing the tab on each side. With your finger, push down on the tab on the right side of drawer, and up on the tab on the left side of drawer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Lay a cotton cloth beneath the drain pump filter to absorb any water still in it. Then remove the drain pump filter by turning it counterclockwise. Remove large clumps of lint by hand from the filter and place lint in a suitable waste container. Remove remaining residue from the filter by rinsing with water. Reinsert the drain pump filter by turning it clockwise. Make sure to turn it in as far as it will go, with the filter handle remaining as close as possible to the vertical position. We hope this information helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
