This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to open in a controlled fashion. If you open you...
This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub...
This part releases the detergent and rinse aid into the dishwasher.
$148.02
Special Order
Questions And Answers for ZBD6920V00SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
January 13, 2020
The black seal that is around the frame of the dishwasher needs to be replaced. Can you please send me the part # so i can order. Also does it just fit into place? Is any glue needed?
For model number ZBD6920V00SS
Hi Lisa. If you are talking about the one piece gasket then this is tub gasket PS958888. No glue needed for this repair it just fits into place. Thank you for your question and good luck with your repair!
No water entered, replaced inlet valve, checked float switch which appears ok.
Unit will now take in water & will pump out, but no washer action ever initiates.
Is this a pump?
Thanks
For model number ZBD6920V00SS
Hi Stephen, thank you for reaching out. The problem seems to be with the Circulation Pump Motor, and you may need to replace it, the part number is PS3652479. The Circulation Pump Motor pumps water through the spray arms during the dishwashing cycle. If that does not help, we would recommend checking the Door Latch, part number PS959002. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Pull old rack out, slip new one in! One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.