This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element i...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Whirlpool Genuine OEM W11107275 Range Cooling Fan Motor.
Possible Repair Solution For:
Will not start, takes too long to cool
Please Note: This is intended as a guideline only, as other items c...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shelley
February 10, 2020
I am getting an error message of f8e0 call services cooling fan speed too slow. Any help would be appreciated. If this can be dye'd
For model number YWEE730H0DW0
Hello and thank you for writing.
Yes, Fan speed below 500 rpm, either because the fan PS12347171 is spinning too slowly and might be faulty and needs to be replaced as it will affect the function of your unit. We hope this helps. Please contact us anytime if you require further assistance.
How do you remove the glass top on the Whirlpool range Gold series?
For model number YWEE730H0DW0
Hi Sylvie, thank you for reaching out. We are providing you with some instructions that will help you replace the glass top. Follow the instructions given below:
1. Turn off range.
2. Remove the screws holding the front control panel.
3. Lower the control panel.
4. Disconnect the wires' connections from the switches.
5. Remember the orientation of the wires.
6. Remove the screws holding the elements pan with the glass top.
7. Remove the glass top and replace it with a new one.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.