This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Glass ONLY. This inner door glass is a heat resistant part that fits into a stove, oven, wall oven, cooktop, or range as the inner glass panel of the appliance door.
This single oven rack is used to provide a durable surface for your cookware inside the oven for baking/broiling. The oven rack measures approximately 24.76” x 15.78”, is made of metal and is chrome in color. This oven rack is a genuine OEM part and is sold individually.
This 5-watt 12-volt halogen light bulb provides light in the oven cavity when the door is open or the switch is turned on. The light assembly is a little over 1” long. If the light is not coming on the bulb may be burnt out or the socket has failed and will need to be replaced. This is a genuine OEM part and is sold individually.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This part is the replacement door gasket for your oven. It is now made of black rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insulates the oven and keeps heat in. If your oven will not heat up properly, or if you notice that the door gasket has become loose or worn,...Read more it may need to be replaced. To replace the door gasket, you will need to remove the retaining bracket at the bottom of the oven door, then carefully pull the gasket away from the front of the oven cavity. Then, push the new gasket inside the groove on the outside of the oven cavity, securing it with the arrowhead fasteners that are built in to the oven cavity. This is an OEM part from the manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa - For model number YKEMC308KM01
January 4, 2020
What glass plate do I need for the microwave. Txs
Hi Lisa, the glass plate is linked below. Thank you for your question and good luck with your repair!
The left side torsion spring for the microwave door broke.
I cannot find a part number for the left one , there is only part number for the right side torsion spring. Are they the same?
Hi Miri, thank you for your inquiry. Yes, the torsion spring, part number PS11742586, will work with both left and right side door hinges. Glad to be of help!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Anthony - For model number YKEMC308KM01
June 15, 2026
BUITIN MICROWAVE kitchen aid microwave is not heating but has a burnt component smell with no error code? could it be door switch , highVoltage capacitor diode, or magnatron?
Hi Anthony, thank you for reaching out. The issue could be with the magnetron. It generates the microwave energy, and when it fails due to burnout or a short circuit, it often gives off a strong burnt electrical smell and immediately stops heating. You may need to replace it. The part number is PS11742458. We hope this solves your problem!
Outdoor glass just blew all over the kitchen . When i put the model number in tells me outdoor glass not available. How can i obtain the glass/outside tel 905 9777240
Hello Susan, thank you for writing. Sadly the replacement for your model is discontinued, we have no replacement information for it. You will need to reach out to Kitchenaid directly for a substitution part number. Please feel free to get back in touch with us if they provide one. Thank you!
Was this helpful?
Thank you for voting!
Abraham - For model number YKEMC308KM01
April 28, 2022
Microwave door not close properly & show ‘Door’ light. What are the parts for torsion spring, left & right. As the Kitchenaid technician said parts are not available. Part # WP 4452395 for left side. For right side is it WP 4452396. Thanks
Hello Abraham, thank you for your question. We have researched the model you have provided, and we would suggest the Torsion Spring - Stainless Steel - Left Side part number PS11742585 and the Torsion Spring - Stainless Steel - Right Side, part number PS11742586. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broke the glass panel inside the oven door -- dropped a baking dish on the glass!
238 of 302 peoplefound this instruction helpful.
Robert from Wildwood, MO
Easy
30 - 60 mins
Screw drivers
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute
... Read more project), and reattached the door to the oven. Cleaning the inside of the door took longer than the actual repair!
Read less
Was this helpful?
Thank you for voting!
No heat after cleaning oven
109 of 124 peoplefound this instruction helpful.
Frederick from St. Louis, MO
Easy
15 - 30 mins
Nutdriver, Pliers
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your pow
... Read moreer cord or gas line is not long enough to make it out of your wall space. Or of your oven is attached well to the frame.
Read less
Was this helpful?
Thank you for voting!
Cracked the inner door glass by wiping with wet rag when hot
66 of 78 peoplefound this instruction helpful.
James from Renton, WA
Easy
30 - 60 mins
Screw drivers
Removed the oven door by following the straightforward instructions in the user's manual. Removed philips head screws to take the door assembly apart. Removed clips holding the two inner door glass plates, and the two plates. Removed the clamp holding the broken glass plate, then the glass and associated glass fragments. Then cleaned
... Read moreand re-installed the three glass plates and their clamps in reverse order. Re-assembled the door and re-attached to the oven. Only cautionary note is to be careful when removing, handling and re-installing the various glass plates. Watch out for fragments from the broken plate; they can cut you and/or fall on the floor.
My Orders
