My Orders
Y6020 (Type 0) DeVilbiss Compressor - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Nut .375-16 UNC-2B H
Part #SSF-8080-ZN
No Longer Available
Fitting 90DEG Elbow
Part #SSP-537
No Longer Available
Bumper Recessed Rub
Part #SST-107
No Longer Available
Hose 1/4 ID X 7.50 B
Part #D28499
No Longer Available
Oring 2.132/2.096id
Part #SSG-8169
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Read less
$16.74
Special Order
Valve
Part #D20114
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by te...Read morension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.
Read less
$47.91
Special Order
BELT TIMING
Part #AC-0815
This is an OEM part sourced directly from the manufacturer. The belt is commonly found in Craftsman air compressors. This part is made of flexible rubber, and is used to transfer power between the piston and the pump assembly. Over time, it may become cracked and brittle, requiring replacement. You may need an Allen wrench or hex key when replacing this part. This item is sold individually.
$7.44
Special Order
ASSY FASTENER
Part #ACG-408
This assembly fastener is supplied directly from the original equipment manufacturer. The screws are constructed of metal, and are compatible with many compressor machines. This part is often used to secure the compressor shroud. It is recommended to refer to specific manual and diagrams for repair instructions. This part is sold individu...Read moreally. Purchasing spare screws is also encouraged, as they can wear out over time and regular use. A hex key and a screwdriver are helpful in the removal and replacement.
Read less
$7.44
In Stock
CLAMP HOSE .250 ID
Part #CAC-1206-1
This replacement hose clamp is designed for use in various compressor models and serves an important role in securing hoses to specific parts of the unit. Whether you're performing maintenance or replacing worn components, this clamp helps ensure a tight, leak-free connection. Made from durable metal and sold individually, it’s easy to in...Read morestall and built to withstand the pressure and vibration common in compressor operation. If your hose feels loose or you're noticing air leaks, replacing the clamp can help restore proper function and keep your compressor running smoothly.
Read less
$7.44
Special Order
ISOLATOR PUMP
Part #D25731
This is an original Porter Cable replacement part manufactured for use with air compressors. The rubber isolator is used to reduce vibration caused by the pump and motor. This isolator is sold individually.
$16.72
Special Order
HEAD UMC
Part #CAC-1196
This is an authentic item that is supplied directly from the original equipment manufacturer for use with air compressors. It is an identical replacement for damaged or missing cylinder head that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct application of this component. ...Read moreThis high-quality part is made of durable metal with plastic and is sold individually, keep in mind the gasket and the hardware are all sold separately.
Read less
$7.44
Special Order
SCREW .250-20X.500 H
Part #D21172
This is a genuine replacement part sourced from the original manufacturer for use with air compressors and generators. The flanged hex head bolt is used with several different types of equipment and the application of the screw can vary based on the model of the machine. This item is available as an individual replacement part.
Common Symptoms of the Y6020
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More